355 materials
Inconel 600 is a nickel-chromium austenitic superalloy with excellent oxidation and corrosion resistance up to 1100°C, used in aerospace, chemical processing, and nuclear applications. The annealed condition provides optimal ductility and corrosion resistance with reduced yield strength compared to cold-worked tempers, making it suitable for applications requiring high toughness and resistance to intergranular corrosion in service temperatures up to approximately 900°C.
Inconel 625 offers outstanding corrosion and oxidation resistance, with excellent weldability. Used in marine, chemical, and aerospace applications where extreme corrosion resistance at elevated temperatures is needed.
Inconel 718 is the dominant nickel superalloy for gas turbine engine disks and casings, accounting for over 50% of all superalloy production. Excellent high-temperature strength up to ~650°C and good weldability.
Inconel 718 produced via selective laser melting (SLM) is a nickel-based superalloy manufactured through additive manufacturing, combining the exceptional high-temperature strength and corrosion resistance of conventional Inconel 718 with the design freedom and complexity capabilities of metal 3D printing. This material is increasingly adopted in aerospace, power generation, and oil & gas industries where engineers need intricate cooling channels, lightweight geometries, or rapid prototyping of high-performance components that would be difficult or impossible to machine from wrought stock. SLM Inconel 718 is valued for its ability to maintain structural integrity in aggressive thermal and corrosive environments while enabling near-net-shape manufacturing, though careful process control and post-processing (such as heat treatment) are critical to achieve consistent mechanical properties and eliminate porosity inherent to the additive process.
Inconel 718 is a nickel-based superalloy in wrought form that has been precipitation-hardened through aging heat treatment to achieve high strength at elevated temperatures. It is widely used in aerospace, power generation, and oil & gas industries where components must withstand extreme thermal and mechanical stresses while maintaining structural integrity. Engineers select this alloy for critical applications requiring excellent creep resistance, fatigue strength, and corrosion resistance in operating environments that would cause conventional steels and aluminum alloys to fail.
Inconel X-750 is a nickel-based superalloy strengthened by gamma-prime precipitation, designed for high-temperature aerospace applications requiring sustained strength to approximately 1300°F (704°C). The alloy exhibits excellent creep resistance, fatigue strength, and corrosion resistance in jet engine components, gas turbine blades, and fasteners, with the Equalized and Aged temper providing optimal strength development through controlled solution treatment and precipitation hardening.
Indium Gallium Arsenide (InGaAs) is a III-V compound semiconductor formed by alloying indium, gallium, and arsenic, engineered to achieve a bandgap optimized for infrared wavelengths around 1.0–1.7 μm depending on composition. It is the dominant material for high-speed photodetectors, avalanche photodiodes (APDs), and focal plane arrays used in telecommunications, remote sensing, and spectroscopy, where its direct bandgap and high electron mobility enable superior sensitivity to near-infrared light compared to silicon-based detectors. Engineers select InGaAs specifically for long-wavelength fiber-optic communication systems (1.55 μm C-band and L-band), thermal imaging, and precision laser measurement applications where silicon reaches its detection limits.
Indium phosphide (InP) is a III-V binary compound semiconductor with a direct bandgap, widely recognized for high-speed and high-frequency device performance. It is the material of choice for optoelectronic and RF applications where superior electron mobility and saturation velocity enable operation at frequencies and data rates that exceed silicon and gallium arsenide alternatives. InP's direct bandgap makes it especially valuable for integrated photonics, long-wavelength infrared detectors, and millimeter-wave integrated circuits used in telecommunications, aerospace, and emerging 5G/6G systems.
Kapton HN is a high-performance polyimide film that represents the standard-grade variant of DuPont's Kapton family, engineered for thermal stability and electrical insulation across demanding temperature ranges. It is widely deployed in aerospace, electronics, and electrical industries where components must maintain dimensional stability and dielectric properties in high-heat environments—such as motor windings, transformer insulation, flexible printed circuits, and spacecraft thermal control systems. Engineers select Kapton HN over commodity polymers when extended service at elevated temperatures combined with mechanical reliability and chemical resistance is non-negotiable; its balanced stiffness and thermal durability make it a go-to material for harsh operational conditions where alternative plastics would degrade or fail.
MP159 is a cobalt-based superalloy containing nickel, chromium, and molybdenum, designed for high-temperature aerospace applications requiring excellent fatigue strength and corrosion resistance up to approximately 700°C. The STA (solution-treated and aged) cold-drawn condition provides enhanced tensile strength and fatigue performance through precipitation hardening, making it suitable for engine components, fasteners, and structural elements in military aircraft and gas turbine applications.
MP159 is a nickel-cobalt-base superalloy containing chromium, molybdenum, and tungsten, designed for high-strength fastener and spring applications in aerospace engines and structures. The STA (Solution Treated and Aged) cold-drawn condition provides superior tensile strength and yield strength with controlled ductility, maintaining excellent fatigue resistance and stress-rupture performance at elevated temperatures up to approximately 700°C.
MP35N is a cobalt-nickel-chromium-molybdenum superalloy designed for high-strength, corrosion-resistant applications requiring excellent fatigue resistance and performance in cryogenic to moderate elevated temperatures. Primarily used in aerospace fasteners, springs, and medical implants, MP35N offers yield strengths exceeding 1,000 MPa with superior resistance to stress-corrosion cracking and seawater corrosion compared to conventional stainless steels.
MP35N STA Cold Drawn is a cobalt-nickel-chromium-molybdenum superalloy in solution-treated and aged condition with cold-drawing, used primarily in high-temperature aerospace fasteners and springs requiring exceptional strength retention to 600°C and excellent corrosion resistance in oxidizing and seawater environments. The cold-drawn condition provides increased yield and tensile strength with controlled ductility, making it suitable for applications demanding both mechanical performance and fatigue resistance at elevated temperatures.
Ni-Mn-Ga is a ferromagnetic shape memory alloy (FSMA) that combines magnetic properties with the ability to recover large strains when heated or exposed to magnetic fields, enabling actuation without traditional electrical current. The alloy is employed in niche applications requiring compact, silent, responsive actuators—particularly in aerospace, automotive adaptive systems, and biomedical devices where conventional electromagnetic or piezoelectric solutions are impractical. Engineers choose this material when shape recovery must be triggered magnetically, when noise and power efficiency are critical, or when space constraints demand high strain output from minimal volume, though availability, cost, and brittleness relative to conventional shape memory alloys (like NiTi) currently limit adoption to specialized, performance-critical roles.
NiTiCu is a copper-modified nickel-titanium shape memory alloy that combines the reversible phase transformation behavior of NiTi with improved thermal stability from copper alloying. The addition of copper narrows the thermal hysteresis and raises transition temperatures, making this alloy useful for applications requiring precise actuation within constrained temperature windows or where repeatability across thermal cycles is critical. Unlike binary NiTi, the ternary composition offers better control over the austenite-finish and martensite-start temperatures, reducing energy losses and improving cycling durability in temperature-sensitive systems.
NiTiHf is a ternary shape memory alloy combining nickel, titanium, and hafnium, engineered to extend the operating temperature range beyond conventional NiTi by raising transformation temperatures while maintaining superelastic and shape-memory functionality. It is used in aerospace propulsion systems, high-temperature actuators, and thermal-cycling-resistant seals where traditional NiTi becomes unreliable; the hafnium addition is critical for applications demanding performance above 100°C where shape recovery and damping are essential design features. Compared to NiTi, NiTiHf trades some strain capacity and thermal stability window for significantly higher service temperatures, making it the material of choice when heating rules out conventional shape memory alloys but full-ceramic or superalloy rigidity is undesirable.
NiTiNb is a ternary nickel-titanium-niobium shape memory alloy engineered to exhibit wide thermal hysteresis, enabling large temperature differentials between the martensite and austenite phases during thermomechanical cycling. This composition is used in applications requiring high actuation temperatures, damping over broad temperature ranges, or robust recovery behavior under cyclic loading, particularly in aerospace sealing systems, precision actuators, and vibration isolation devices where conventional NiTi alloys lack sufficient thermal span or functional stability.
Nitinol (NiTi) is a near-equiatomic nickel-titanium intermetallic alloy that exhibits shape memory and superelastic behavior, allowing it to recover large deformations upon heating or unloading without permanent plastic strain. This unique metallurgical behavior—driven by reversible martensitic phase transformations—makes it invaluable in applications requiring actuators, dampers, or components that must return to a programmed geometry after deformation. Engineers select Nitinol over conventional metals when design space is constrained and active or passive motion control is needed, or when the ability to absorb large strains without failure is critical to device function.
Nitinol (NiTi) is a nickel-titanium shape-memory and superelastic alloy that exhibits remarkable strain recovery—when deformed, it returns to its original shape upon unloading or heating, depending on the alloy's thermal state. This property stems from a reversible phase transformation between austenite and martensite crystal structures, making it fundamentally different from conventional metals. In superelastic form (used at room temperature above the austenite finish temperature), Nitinol absorbs and releases large elastic deformations repeatedly without permanent set, enabling designs where flexibility and damage tolerance are critical. The alloy is widely deployed in medical devices—stents, guidewires, orthodontic wires, and surgical instruments—where its biocompatibility, fatigue resistance, and ability to conform to complex geometries while maintaining structural integrity are essential; it is also found in aerospace actuators, seismic dampers, and precision mechanical switches where its unique combination of elasticity and hysteretic energy absorption outperforms conventional springs or elastic materials.
Nylon 66 (PA 6/6) is a semi-crystalline thermoplastic polyamide created by condensation polymerization of hexamethylenediamine and adipic acid, offering a balance of stiffness, impact resistance, and chemical durability. It is widely used in automotive (fuel tanks, air intake manifolds, under-hood clips), electrical/electronics (connectors, switch housings, circuit board components), and consumer goods (textiles, zippers, brush bristles) where moderate temperature service and repeated flexing are common. Engineers select nylon 66 over alternatives like nylon 6 for its higher melting point, better dimensional stability, and superior creep resistance, while favoring it over glass-filled variants when lower cost and injection moldability outweigh the need for maximum rigidity.
Oxidized Zr-2.5Nb (marketed as Oxinium) is a surface-hardened zirconium alloy created by controlled oxidation of a zirconium-niobium base metal, producing a ceramic oxide layer bonded to a ductile metallic substrate. This material is engineered specifically for bearing and articulating surfaces in orthopedic implants, where the hard oxide exterior minimizes wear and the tough underlying alloy provides damage tolerance. Compared to conventional cobalt-chromium or alumina-on-plastic combinations, Oxinium offers reduced wear rates and improved scratch resistance while maintaining the fracture toughness advantage of metallic substrates, making it particularly valuable in hip and knee replacements where long-term durability and low particulate generation are critical.
PEEK 450G is a glass-filled polyetheretherketone (PEEK) composite that combines the high-performance thermoplastic base polymer with reinforcing fibers to enhance stiffness and dimensional stability while maintaining PEEK's inherent chemical and thermal resistance. It is widely used in aerospace, automotive, oil & gas, and medical device industries where components must withstand elevated temperatures, aggressive chemical exposure, or demanding mechanical loads in continuous-use environments. Engineers select glass-filled PEEK over unfilled PEEK or competing thermoset composites when they need the combination of excellent creep resistance, low moisture absorption, electrical properties, and the processing advantages of a thermoplastic that can be injection-molded or machined into complex geometries.
PEEK is a high-performance semicrystalline thermoplastic polymer belonging to the polyaryletherketone (PAEK) family, known for exceptional chemical resistance, dimensional stability at elevated temperatures, and mechanical performance across a wide operating range. It is widely used in aerospace, medical device, automotive, and oil & gas industries where demanding thermal, chemical, and mechanical environments require a lightweight polymer alternative to metals or thermosets. Engineers select PEEK over conventional plastics when applications demand continuous service at elevated temperatures, resistance to aggressive chemicals and sterilization methods, low flammability, or biocompatibility—making it particularly valuable in applications where material reliability directly impacts safety or performance.
PEI Ultem 1000 is a high-performance thermoplastic polyetherimide (PEI) engineering resin known for its exceptional thermal stability, mechanical strength, and chemical resistance across a wide temperature range. It is widely used in aerospace, automotive, and industrial applications where components must withstand elevated temperatures, mechanical stress, and exposure to oils, fuels, and other aggressive chemicals without significant degradation. Engineers select Ultem 1000 over commodity plastics and lower-performance engineering polymers when lightweight construction, dimensional stability in high-heat environments, and long-term durability under demanding conditions are critical design drivers.
PEKK (polyetheretherketone) 60/40 is a high-performance aromatic polyketone thermoplastic that combines excellent thermal stability with mechanical strength, making it suitable for demanding structural applications. It is widely used in aerospace, automotive, and industrial sectors where components must withstand elevated temperatures, chemical exposure, and mechanical loading without significant degradation. Engineers select PEKK over lower-performing thermoplastics (like PPS or PEEK alternatives) when thermal limits, dimensional stability, and long-term performance in harsh environments are critical design constraints.
PH13-8Mo is a martensitic precipitation-hardening stainless steel (13% Cr, 8% Ni, Mo, Al) that achieves ultra-high strength in the H1000 condition through age hardening, providing yield strengths around 1310 MPa with good corrosion resistance and fatigue performance for aerospace fasteners, bearings, and critical structural components. The H1000 temper represents maximum strength conditioning and maintains useful strength to approximately 300°C with excellent bearing fatigue and fatigue crack growth resistance, making it suitable for demanding load-bearing applications where both strength and corrosion resistance are required.
PH13-8Mo is a martensitic precipitation-hardening stainless steel (13% Cr, 8% Ni, Mo, Al additions) used in aerospace applications requiring high strength and corrosion resistance to approximately 600°C; the H1050 condition provides a yield strength around 1,050 ksi through precipitation hardening, with excellent fatigue performance and stress-corrosion cracking resistance in chloride environments.
PH13-8Mo H1100 is a precipitation-hardened martensitic stainless steel (13% Cr, 8% Mo, 2.5% Ni) that achieves high strength (typically 1310 MPa yield) through H1100 heat treatment (1100°F aging), providing excellent corrosion resistance and fatigue performance for aerospace fasteners, landing gear components, and other critical applications requiring high strength-to-weight ratio at elevated temperatures up to ~315°C. Available in forged, ring, and extruded bar forms, this alloy offers good ductility and toughness balanced with superior tensile strength suitable for demanding structural and fastening applications per AMS 5629.
PH13-8Mo stainless steel is a precipitation-hardening martensitic stainless steel containing molybdenum and copper that delivers high strength (typically 1,310 MPa yield) with good corrosion resistance, suited for aircraft engine components and fasteners. The H950 condition is aged to provide peak hardness and tensile properties while maintaining adequate ductility and fracture toughness for critical aerospace applications per AMS 5629.
PH15-7Mo is a precipitation-hardening stainless steel with molybdenum strengthening providing yield strengths around 1,380 MPa (200 ksi) in the H1050 condition, suitable for aerospace fasteners, springs, and high-strength structural components requiring corrosion resistance at elevated temperatures. The H1050 temper delivers optimized strength through controlled aging while maintaining toughness for critical bearing and fastening applications in aircraft engines and airframes.
PLGA is a synthetic biodegradable copolymer composed of lactic acid and glycalic acid monomers, widely used in medical and pharmaceutical applications where controlled degradation is required. The material is extensively employed in drug delivery systems, surgical implants, and tissue engineering scaffolds because it degrades predictably in physiological environments while maintaining initial structural integrity, making it a preferred alternative to permanent polymers when temporary mechanical support or staged therapeutic release is needed. Its established biocompatibility and FDA approval for medical devices have made it an industry standard in regenerative medicine and minimally invasive therapeutics.
PMMA bone cement is an acrylic polymer formulated specifically for orthopedic and dental fixation, typically supplied as a two-component system (powder and liquid monomer) that polymerizes in situ to create a rigid, biocompatible interface. It is widely used in joint replacement surgery, spinal instrumentation, and dental prosthetics to mechanically interlock implants with bone and provide load transfer; engineers select it for its established biocompatibility, ease of application, and decades of clinical track record, though it is gradually being supplemented by newer formulations offering improved mechanical properties and reduced exothermic curing reactions.
Polycaprolactone (PCL) is a semi-crystalline aliphatic polyester synthesized by ring-opening polymerization of ε-caprolactone, valued for its biodegradability and processability at moderate temperatures. It is widely used in biomedical applications—including sutures, drug delivery systems, and tissue engineering scaffolds—as well as in flexible films, adhesives, and 3D printing filaments, where its combination of low melting point, high elongation capability, and slow degradation in physiological environments makes it preferable to faster-degrading polymers like PGA or more rigid alternatives.
Polycarbonate (PC) is a transparent, amorphous thermoplastic polymer known for its exceptional impact resistance and optical clarity, making it significantly tougher than acrylic or glass alternatives. It is widely used in applications demanding durability combined with transparency—including safety glazing, automotive windows, protective equipment, and consumer electronics—and is preferred where repeated impact, thermal cycling, or dimensional stability under load are critical concerns. Engineers select PC when standard brittle plastics fail, when weight savings over glass are essential, or when processing flexibility and design complexity justify slightly higher material costs.
Poly-L-lactic acid (PLLA) is a semi-crystalline thermoplastic polyester derived from renewable resources, commonly produced from corn starch or sugarcane. It is widely used in medical devices—particularly orthopedic fixation (screws, plates, pins) and cardiovascular stents—where its controllable biodegradability allows the material to gradually resorb as tissue heals, eliminating the need for device removal. PLLA is also employed in sustainable packaging, 3D-printed prototypes, and textile fibers; engineers select it over conventional plastics when environmental impact, biocompatibility, or temporary mechanical support is critical, though its brittleness and lower thermal stability compared to petroleum-based polymers require careful design consideration.
Porous tantalum, also known by the trade name Trabecular Metal, is a highly biocompatible pure tantalum foam structure engineered with interconnected porosity to mimic cancellous bone architecture. Its combination of biological integration capability, corrosion resistance, and radiopacity makes it the preferred choice for orthopedic and spinal implants where bone on-growth and long-term fixation are critical; it outperforms alternatives like titanium alloys in applications requiring rapid osseointegration and can eliminate the need for bone cement or supplemental fixation screws.
PPS (polyphenylene sulfide), marketed as Ryton R-4, is a high-performance engineering thermoplastic known for excellent chemical resistance, dimensional stability, and retention of mechanical properties at elevated temperatures. It is widely used in automotive, aerospace, chemical processing, and electrical industries where corrosive environments, sustained heat, or precise dimensional tolerance are critical requirements. Engineers select PPS over commodity plastics when long-term exposure to aggressive solvents, acids, or bases is expected, or when operating temperatures preclude use of polyesters or polyamides.
PTFE (Polytetrafluoroethylene) is a synthetic fluoropolymer known for its exceptional chemical resistance, low friction coefficient, and non-stick surface properties. It is widely used in chemical processing equipment, pharmaceutical manufacturing, food handling systems, and sealing applications where corrosive environments or sterile conditions demand a material that won't degrade or contaminate. Engineers select PTFE when standard plastics or metals fail due to chemical attack, when low-friction sliding surfaces are critical, or when non-reactivity with aggressive fluids is essential—though its relatively low stiffness and creep under sustained load require careful design consideration.
Pyrolytic carbon is a pure carbon ceramic produced by thermal decomposition of hydrocarbon gases, resulting in a dense, crystalline solid with excellent chemical inertness and biocompatibility. It is widely used in medical implants—particularly heart valve prostheses and orthopedic coatings—where its combination of wear resistance and biological tolerance makes it superior to polymeric alternatives; it also serves in high-temperature sealing applications, aerospace components, and nuclear reactor environments where chemical stability and low neutron absorption are critical.
QE22A is a magnesium alloy containing rare earth elements (primarily cerium and lanthanum) designed for elevated-temperature aerospace applications, offering superior creep resistance and strength retention up to approximately 300°C. The T6 temper (solution heat-treated and artificially aged) provides optimal mechanical properties and dimensional stability for sand-cast components in engines and structural applications operating under thermal stress.
René 41 is a cobalt-based superalloy containing nickel, chromium, molybdenum, and aluminum alloying elements, designed for high-temperature structural applications in gas turbines and jet engines. The STA (solution-treated and aged) condition provides elevated-temperature strength retention and creep resistance up to approximately 1200°F (650°C), with excellent fatigue performance and oxidation resistance for demanding aerospace propulsion environments.
René 41 STA is a nickel-base superalloy (Ni-Co-Cr-Mo-W-Al-Ti) in solution heat-treated and aged condition, designed for high-temperature structural applications in jet engines and gas turbines operating up to 1100°F (593°C). The STA condition provides optimized strength and creep resistance through controlled grain structure and precipitation hardening, with excellent bearing strength and fatigue performance in bar, forging, plate, and sheet forms.
René 88DT is a nickel-based superalloy designed for high-temperature structural applications requiring exceptional strength and creep resistance at elevated temperatures. It is used primarily in aerospace propulsion systems—particularly in turbine engine components such as blades, vanes, and casings—where sustained thermal and mechanical loads demand reliable performance in extreme environments. Engineers select this alloy when superior high-temperature capability and fatigue resistance are critical, making it preferable to conventional nickel superalloys in next-generation engine designs and demanding industrial gas turbine applications.
Silicon carbide (SiC) is a ceramic compound combining silicon and carbon in a 1:1 ratio, engineered as a wide-bandgap semiconductor with exceptional hardness and thermal stability. It is widely deployed in high-temperature power electronics (MOSFETs and Schottky diodes), abrasive applications, refractories for furnace linings, and emerging automotive/renewable energy inverters where its superior thermal conductivity and thermal shock resistance outperform traditional silicon. Engineers select SiC over conventional semiconductors when operating environments exceed 200°C or when high switching frequencies and power density are critical, though cost and manufacturing maturity remain considerations relative to established Si technology.
Medical-grade silicone is a biocompatible elastomeric polymer engineered to meet stringent FDA and ISO standards for prolonged contact with human tissue and body fluids. It is widely used in implantable and external medical devices where flexibility, inertness, and resistance to bodily fluids are critical—including catheters, breast implants, pacemaker housings, and seals in insulin pumps. Engineers select medical-grade silicone over commodity alternatives because its chemical stability, low inflammatory response, and ability to withstand repeated sterilization cycles make it the gold standard for applications requiring long-term biocompatibility and regulatory approval.
Silicon germanium (SiGe) is a semiconductor alloy combining 70% silicon and 30% germanium, engineered to bridge the bandgap and lattice properties of its constituent elements. This material is widely used in high-frequency analog and mixed-signal integrated circuits, particularly in RF amplifiers, satellite communications, and automotive radar systems, where it offers superior speed and noise performance compared to pure silicon while maintaining better integration compatibility than germanium alone. SiGe's strained-layer engineering enables higher charge carrier mobility than bulk silicon, making it the preferred choice for noise-critical applications and millimeter-wave circuits where cost-effectiveness and established silicon fabrication processes provide significant manufacturing advantages.
Silicon is a crystalline semiconductor element that forms the foundation of modern microelectronics and photovoltaics. It is the primary material for integrated circuits, discrete transistors, and solar cells due to its ability to be precisely doped and processed into p-n junctions that control electrical current. Beyond electronics, silicon is valued in MEMS (micro-electromechanical systems), optical applications, and high-temperature structural uses where its combination of strength, thermal stability, and controlled electrical properties outperform metals and insulators.
Unalloyed tantalum (ASTM F560) is a highly pure refractory metal (≥99.5% Ta) prized for its exceptional corrosion resistance, biocompatibility, and ability to withstand extreme temperatures without degradation. It is widely used in chemical processing equipment, medical implants, and aerospace/defense applications where exposure to aggressive corrosive environments or physiological fluids demands a material that remains stable and inert over extended service life. Engineers select tantalum when stainless steels and nickel alloys prove insufficient due to chloride pitting, sulfuric acid attack, or when direct contact with living tissue requires proven biocompatibility without elution of harmful ions.
Ti-13Nb-13Zr is a near-beta titanium alloy composed primarily of titanium with balanced additions of niobium and zirconium, designed to achieve low elastic modulus while maintaining strength and biocompatibility. It is primarily used in orthopedic implants and dental applications where reducing the stiffness mismatch between implant and bone is critical to prevent stress shielding and promote long-term integration. This alloy is notable for combining β-stabilizing elements (Nb, Zr) that lower the Young's modulus compared to conventional titanium alloys, making it attractive for load-bearing implants that require both mechanical reliability and biological acceptance without the cytotoxicity concerns of vanadium-containing alternatives.
Ti-13V-11Cr-3Al is a metastable beta titanium alloy containing vanadium and chromium additions for enhanced strength and hardenability, primarily used in aerospace fasteners, springs, and bearing applications. The annealed condition provides moderate strength levels (approximately 130–150 ksi yield) with improved ductility and fracture toughness compared to aged conditions, suitable for applications requiring good fatigue resistance and damage tolerance.
Ti-13V-11Cr-3Al is a metastable beta titanium alloy containing 13% vanadium, 11% chromium, and 3% aluminum, designed for high-strength aerospace fastener and structural applications requiring superior bearing strength and fatigue resistance. The STA (solution-treated and aged) condition provides yield strengths in the 1,200–1,400 MPa range with excellent compressive properties and damage tolerance, making it suitable for critical bearing surfaces and highly stressed mechanical components in aircraft structures and engines.
Ti-15Mo is a metastable beta-phase titanium alloy containing 15 wt% molybdenum, designed to combine the corrosion resistance and biocompatibility of titanium with the strength and lower modulus benefits of beta-stabilized microstructures. It is used in biomedical implants (orthopedic and dental), aerospace components, and chemical processing equipment where corrosion resistance, biocompatibility, and moderate strength are prioritized; compared to α+β titanium alloys like Ti-6Al-4V, Ti-15Mo offers improved corrosion resistance and lower stiffness while maintaining good strength, making it particularly valuable in load-bearing implants where modulus matching to bone or tissue is beneficial.
Alpha titanium alloy with excellent weldability and cryogenic toughness. 795 MPa yield. Used in cryogenic applications (liquid hydrogen/oxygen), high-pressure gas bottles, and airframe forgings. One of the oldest aerospace titanium alloys.
Ti-5Al-2.5Sn is a near-alpha titanium alloy used primarily in aircraft engines and high-temperature aerospace applications, offering good creep resistance and tensile strength up to approximately 600°F. The annealed condition provides optimal ductility and dimensional stability after hot forming operations, with yield strength around 70-90 ksi and excellent damage tolerance characteristics.
Ti-6Al-2Sn-4Zr-2Mo is a near-alpha titanium alloy strengthened by aluminum and molybdenum additions, designed for elevated-temperature applications requiring moderate strength and creep resistance up to approximately 600°C in aerospace gas turbine engines and compressor casings. Duplex annealed condition provides optimal combination of strength and fracture toughness through controlled recrystallization and alpha-phase stabilization, with yield strengths typically 800–1000 MPa and good ductility (8–15% elongation) across bar, forging, and sheet product forms.
Ti-6242 is a near-alpha titanium alloy combining aluminum, tin, zirconium, and molybdenum additions to create a material with excellent creep resistance and thermal stability at intermediate temperatures. It is used primarily in gas turbine engines, compressor casings, and other high-temperature structural applications where sustained performance in the 300–500 °C range is critical. Engineers select Ti-6242 over conventional Ti-6Al-4V when creep resistance and extended service life at elevated temperatures are priorities, making it particularly valuable in military and commercial aerospace propulsion systems where weight savings and durability directly impact performance.
Ti-6Al-4V is the most widely used titanium alloy, offering an excellent strength-to-weight ratio, good corrosion resistance, and biocompatibility. Standard workhorse alloy for aerospace, biomedical, and high-performance applications.
Ti-6Al-4V annealed is a two-phase titanium alloy (6% aluminum, 4% vanadium) in a stress-relieved condition offering moderate strength with improved ductility and fracture toughness compared to higher-strength tempers. Widely used in aerospace engine casings, compressor blades, and airframe components where operating temperatures to 300°C and damage tolerance are critical; available in forgings, extrusions, castings, and wrought forms per MIL specifications.
Ti-6Al-4V ELI (Extra Low Interstitial) is an extra-pure variant of the industry-standard Ti-6Al-4V titanium alloy, with tightly controlled oxygen and other interstitial elements to maximize ductility and fracture toughness. This material is the preferred choice in biomedical implants, aerospace components, and other applications where reliability and tissue compatibility are critical, as the reduced interstitial content enhances both mechanical reliability and biocompatibility compared to standard Ti-6Al-4V. Engineers select Grade 23 ELI when implant longevity, crack resistance, and minimal inflammatory response are non-negotiable—making it the de facto standard for orthopedic and cardiovascular devices despite higher material cost.
Ti-6Al-4V Grade 5 is a two-phase titanium alloy containing aluminum and vanadium alloying elements, representing the most widely used titanium alloy in industry due to its excellent balance of strength, weight, and corrosion resistance. It is the workhorse material for aerospace structures, medical implants, and chemical processing equipment, chosen by engineers specifically for applications requiring high strength-to-weight ratio, superior biocompatibility, and reliable performance in demanding thermal and corrosive environments where conventional steels or aluminum alloys fall short.