24,832 materials
CoAg3C6N6 is an experimental intermetallic compound combining cobalt, silver, carbon, and nitrogen phases. This research-stage material belongs to the family of complex metal-organic or metal-nitride composites and has not achieved widespread commercial adoption. The compound's potential applications lie in high-performance structural or functional materials where combined metallic and ceramic-like properties are desired, though its engineering utility remains under investigation and would require validation for specific load-bearing or environmental conditions.
CoAgF3 is an experimental intermetallic compound combining cobalt, silver, and fluorine, belonging to the family of metal fluorides with potential applications in advanced functional materials research. This material remains largely in the research phase, with interest driven by the possibility of combining cobalt's magnetic and catalytic properties with silver's conductivity in a fluoride matrix, positioning it for investigation in specialized electrochemical, catalytic, or magnetic device applications where conventional materials fall short.
CoAgN₃ is a cobalt-silver nitride compound that exists primarily in research and experimental contexts rather than established industrial production. This material belongs to the family of transition metal nitrides, which are studied for potential applications requiring high hardness, thermal stability, or catalytic properties. Limited commercial availability and undefined composition suggest this compound is in early-stage investigation, likely for specialized applications where cobalt-silver synergy might offer advantages in wear resistance, catalytic activity, or electronic properties not achievable with conventional alternatives.
CoAlN3 is a cobalt aluminium nitride compound that belongs to the transition metal nitride family, potentially explored as a hard ceramic coating or functional material. This composition sits at the intersection of ceramic and metallic properties; however, it remains largely in the research domain rather than established industrial production. The material family (cobalt nitrides and aluminium nitrides) has attracted interest for wear-resistant coatings, high-temperature applications, and catalytic systems, though CoAlN3 specifically requires verification of its phase stability and reproducibility before widespread engineering adoption.
CoAs is an intermetallic compound combining cobalt and arsenic, belonging to the transition metal arsenide family. While not widely established in mainstream industrial production, this material and related cobalt arsenides are of interest in research contexts for their potential in thermoelectric applications, magnetic devices, and catalysis due to the unique electronic properties that arise from cobalt-arsenic bonding. Engineers considering CoAs should evaluate it primarily as an experimental or specialized functional material rather than a structural component, with applications dependent on specific property requirements in emerging technologies.
CoAs2 is an intermetallic compound combining cobalt and arsenic, belonging to the family of transition metal pnictides. This material exhibits notable mechanical stiffness and is primarily of research and specialized industrial interest rather than a commodity material. CoAs2 and related cobalt arsenides are investigated for applications in thermoelectric devices, magnetic materials, and high-temperature structural applications, where its density and elastic properties offer potential advantages in niche engineering contexts.
CoAs₄F₁₈ is a synthetic metal-organic compound combining cobalt with arsenic and fluorine, representing an experimental intermetallic or complex fluoride material not yet established in mainstream engineering practice. Research compounds of this type are typically explored for specialized applications in catalysis, electronic materials, or high-temperature chemistry where the combination of transition metals and fluorine ligands offers potential for novel properties. The cobalt-arsenic-fluoride family remains primarily in the research phase; engineers should consult recent materials literature to assess viability for emerging applications requiring specific catalytic, electronic, or thermal characteristics.
CoAs5 is a cobalt arsenide intermetallic compound belonging to the metal-metalloid class of materials. This compound is primarily of scientific and materials research interest rather than established industrial production, with potential applications in semiconductor research, thermoelectric materials development, and magnetic alloy studies where cobalt-based arsenides are explored for their electronic and thermal properties.
CoAsBr is a ternary intermetallic compound combining cobalt, arsenic, and bromine elements. This material is primarily of research interest rather than established industrial use, belonging to the family of metal halide and pnictide compounds that are being investigated for potential applications in semiconductors, thermoelectrics, and advanced functional materials. Engineers would consider this compound in exploratory development contexts where the combination of transition metal (Co), pnictogen (As), and halide (Br) properties might enable novel electronic, thermal, or catalytic performance—though limited production scale and established applications mean it remains largely confined to academic and specialist materials development programs.
CoAsN₃ is an intermetallic compound combining cobalt, arsenic, and nitrogen in a fixed stoichiometric ratio. This is a research-stage material studied primarily in the context of hard coatings, nitride-based compounds, and potentially functional ceramics, rather than an established commercial alloy. The material family (transition metal nitrides and arsenides) has drawn academic interest for wear resistance, chemical stability, and electronic properties, though CoAsN₃ itself remains largely in experimental development with limited industrial deployment compared to more mature alternatives like WC-Co or TiN coatings.
CoAsPd is a ternary intermetallic compound combining cobalt, arsenic, and palladium. This material belongs to the family of metallic compounds and arsenides that have been of interest in research contexts for their electrical, magnetic, and catalytic properties. CoAsPd and related ternary systems are not widely deployed in mainstream industrial production, but represent exploration into materials with potential for high-performance applications where the combined properties of these elements could offer advantages in specific niche domains.
CoAsPt2 is an intermetallic compound combining cobalt, arsenic, and platinum in a 1:1:2 ratio. This is a research-phase material within the cobalt-platinum alloy family, of interest primarily for magnetic and electronic applications where the platinum content provides corrosion resistance and the intermetallic structure enables tailored magnetic properties.
CoAsRh is a ternary intermetallic compound combining cobalt, arsenic, and rhodium—a rare combination that falls outside common commercial alloy families and appears to be primarily a research material. This compound likely exhibits high stiffness and density characteristic of intermetallic systems, positioning it as a candidate material for extreme-condition applications where conventional alloys reach their limits, though industrial adoption remains limited and its processing, machinability, and long-term performance characteristics require further development.
CoAu3 is an intermetallic compound composed of cobalt and gold in a 1:3 atomic ratio, belonging to the family of precious-metal intermetallics. While primarily of research and specialized industrial interest rather than commodity use, CoAu3 exhibits high density and potential for applications requiring stable gold-cobalt phases, such as specialized coatings, wear-resistant surfaces, or high-temperature contacts where the combination of gold's corrosion resistance and cobalt's strength offers advantages over single-element alternatives.
CoAuN3 is an experimental intermetallic compound combining cobalt, gold, and nitrogen, belonging to the family of ternary nitride alloys. This material exists primarily in research contexts rather than established industrial production, and is investigated for potential applications in high-performance coatings, catalysis, and advanced metallurgical systems where the combined properties of noble metal (Au), transition metal (Co), and nitrogen bonding might offer advantages in corrosion resistance or catalytic activity.
Cobalt–boron (CoB) is an intermetallic compound combining cobalt and boron, typically used as a hard ceramic or wear-resistant coating material. It finds application in cutting tools, wear-protection coatings, and catalytic systems where its hardness and thermal stability are valued. CoB is also of interest in research contexts for hydrogen storage and electrochemical applications, making it relevant for engineers working on advanced surface engineering or emerging energy technologies.
CoB11 is a cobalt-boron intermetallic compound belonging to the family of hard, refractory metal borides. This material is primarily of research and specialized industrial interest, valued for its potential in high-temperature applications and as a wear-resistant coating or reinforcement phase where conventional alloys lose performance.
CoB₂Mo₂ is a transition metal boride compound combining cobalt and molybdenum in a 1:2:2 stoichiometric ratio. This material belongs to the family of hard, refractory metal borides—compounds known for high hardness, thermal stability, and chemical resistance. While primarily studied in research contexts, CoB₂Mo₂ is of interest for applications requiring wear resistance and high-temperature performance, positioning it alongside established hard-facing alloys and ceramic coatings used in cutting tools and extreme-environment components.
CoB₂W₂ is a cobalt-tungsten boride composite—a hard, refractory intermetallic compound combining cobalt and tungsten boride phases. This material belongs to the family of transition metal borides, which are engineered for extreme hardness and thermal stability at elevated temperatures. The dual-phase microstructure leverages cobalt's toughness with tungsten boride's exceptional hardness, making it a candidate for wear-resistant and high-temperature applications where conventional cemented carbides or tool steels fall short. While not yet mainstream in production, such boride composites are active research subjects in cutting tool development, abrasive applications, and thermal barrier systems.
CoB3W3 is a cobalt-tungsten boride compound, part of the refractory metal boride family known for extremely high hardness and thermal stability. This material is primarily of research and specialized industrial interest, valued in applications requiring exceptional wear resistance and thermal shock tolerance where conventional cemented carbides or ceramics fall short. Its high density and hardness characteristics make it relevant for cutting tools, abrasive applications, and high-temperature structural components, though limited commercial availability and processing complexity mean adoption remains restricted to demanding niche applications rather than mainstream use.
CoBaN3 is a cobalt-based metal nitride compound that belongs to the family of transition metal nitrides, which are known for their high hardness and thermal stability. While detailed specifications are limited in standard references, this material is of interest in research contexts for applications requiring extreme hardness and chemical resistance; cobalt nitrides are investigated for wear-resistant coatings, catalytic applications, and high-performance cutting tools where conventional carbides may be inadequate. Engineers would consider this material when conventional alternatives (tungsten carbide, titanium nitride) do not meet performance requirements for wear, temperature, or chemical durability.
CoBeN3 is a cobalt-based intermetallic compound combining cobalt, beryllium, and nitrogen in a stoichiometric composition. This material represents an experimental research compound within the family of refractory intermetallics, developed to explore potential high-temperature and high-strength applications where conventional alloys reach performance limits. Interest in cobalt-beryllium-nitrogen systems stems from the possibility of combining cobalt's catalytic and magnetic properties with beryllium's low density and nitride ceramic strengthening, though this specific compound remains primarily in the research phase and is not yet widely adopted in production engineering.
CoBi3 is an intermetallic compound composed of cobalt and bismuth, representing a research-phase material in the cobalt-bismuth binary system. While not widely deployed in conventional engineering, intermetallic compounds in this family are of interest for their potential in specialized applications where unusual electrical, magnetic, or thermal properties are desired, though such materials typically require careful control of composition and processing to achieve reproducible performance.
CoBiN3 is a cobalt-bismuth nitride intermetallic compound, representing an emerging research material in the family of transition metal nitrides and ternary intermetallics. As a research-phase compound, CoBiN3 is being investigated for its potential in high-temperature structural applications, catalytic systems, and electronic devices where cobalt-based ceramics and intermetallics offer superior hardness, thermal stability, or electrochemical activity compared to conventional alloys. The specific combination of cobalt and bismuth in a nitride matrix suggests potential applications in catalysis (particularly for ammonia synthesis or electrocatalysis), thin-film coatings, or advanced ceramics, though industrial deployment remains limited pending validation of mechanical properties and processing scalability.
CoBMo is a cobalt-based alloy containing molybdenum, belonging to the family of high-strength refractory metal systems. This material combines cobalt's excellent corrosion resistance and high-temperature stability with molybdenum's contribution to hardness and strength, making it relevant for demanding structural and functional applications. The alloy is used in aerospace components, wear-resistant coatings, and tool applications where both toughness and resistance to thermal cycling or corrosive environments are critical; engineers select CoBMo-type systems when superior performance at elevated temperatures or in aggressive chemical environments justifies the material and processing cost compared to conventional steels or superalloys.
CoBN3 is a cobalt-boron-nitrogen compound that represents an experimental hard material in the refractory ceramics and superhard materials family. Research into cobalt-boron-nitrogen systems focuses on achieving high hardness and thermal stability comparable to established alternatives like cubic boron nitride (cBN) and diamond, with potential advantages in chemical inertness and oxidation resistance. This material remains primarily in development stages, with applications under investigation in extreme-environment cutting and grinding tools where conventional hardness alone is insufficient.
CoBr is a cobalt-bromine intermetallic or halide compound in the metal class, representing a research-phase material rather than an established engineering alloy. While cobalt-based materials are well-established in high-performance applications, cobalt bromide compounds remain primarily of academic interest for their potential in catalysis, electronic materials, and specialty chemical applications. Engineers would encounter this material in advanced research contexts rather than conventional structural or functional engineering roles.
Cobalt bromide (CoBr2) is an inorganic metal halide compound belonging to the transition metal bromide family, typically available as a crystalline solid with layered crystal structure. While not a conventional structural material, CoBr2 has gained attention in materials research for applications requiring magnetic properties and catalytic functionality, particularly in battery electrolytes, catalysis, and two-dimensional material derivatives where its layered structure can be exfoliated. Engineers may consider this compound for electrochemical systems and emerging technologies where cobalt's magnetic character and bromide's ionic properties provide functional advantages over conventional alternatives, though it remains primarily a specialty chemical rather than a high-volume engineering material.
CoBW is a cobalt-based binary or ternary alloy system combining cobalt with tungsten and boron. This material family is primarily explored in research and specialized industrial settings for applications requiring high hardness, wear resistance, and thermal stability—particularly in tool materials, wear-resistant coatings, and high-temperature structural components where conventional steel or nickel-based superalloys are insufficient.
CoC (cyclic olefin copolymer) is an engineering thermoplastic that combines the rigidity and optical clarity of polystyrene with superior chemical resistance and low moisture absorption. It is widely used in precision optics, diagnostic devices, and packaging applications where dimensional stability and chemical inertness are critical, and is preferred over competing plastics like polycarbonate when transparency combined with barrier properties and low thermal expansion are essential.
CoC2N is a cobalt-based metal carbide/nitride compound combining cobalt with carbon and nitrogen constituents, representing an advanced hard material within the refractory metal family. This material exhibits properties characteristic of high-hardness ceramic-metal composites and is primarily investigated in research and specialized industrial settings for applications demanding extreme wear resistance and thermal stability. Engineers consider CoC2N where conventional cemented carbides or tool steels reach performance limits, particularly in severe abrasion or high-temperature cutting environments.
CoC4N6 is a cobalt-based intermetallic or nitride compound with a complex crystal structure containing cobalt, carbon, and nitrogen elements. This material represents an emerging research composition in the family of high-hardness cobalt compounds, potentially offering enhanced wear resistance and thermal stability compared to conventional cobalt alloys. The specific phase chemistry and processing routes for CoC4N6 remain specialized, making it relevant primarily for advanced applications where extreme hardness, corrosion resistance, or high-temperature performance justify development effort over established alternatives.
CoCaN₃ is an intermetallic compound combining cobalt and calcium with nitrogen, representing an experimental material in the cobalt-based alloy family. This compound is primarily of research interest for understanding high-entropy and complex intermetallic systems, with potential applications in high-temperature structural materials and specialty catalytic applications where cobalt nitrides and calcium-modified phases offer enhanced performance. Engineers considering this material should note it is not yet a production standard and would require careful evaluation of synthesis routes, phase stability, and property verification for specific applications.
CoCdN3 is a cobalt-cadmium nitride compound representing an intermetallic or ceramic material system based on transition metals and nitrogen. This material appears to be primarily a research or laboratory compound rather than an established commercial material; cobalt-cadmium systems are investigated for potential applications in catalysis, magnetic materials, and advanced ceramics, though cadmium's toxicity limits practical deployment in most industrial applications. Engineers would consider this material only in specialized research contexts or applications where cadmium's unique properties (magnetism, electrochemistry) are essential and environmental/health concerns can be managed.
Cobalt chloride (CoCl) is an inorganic metal halide compound combining cobalt with chlorine, typically encountered as a hydrated salt or anhydrous form in industrial and laboratory settings. It serves primarily in electroplating and metal surface treatment processes, chemical synthesis as a catalyst or precursor, and as a humidity indicator due to its hygroscopic color-change properties. Engineers select cobalt chloride for applications requiring cobalt ion delivery or catalytic function in corrosive chloride environments, though its use is increasingly restricted in some regions due to toxicological concerns.
Cobalt chloride (CoCl₂) is an inorganic compound rather than a traditional engineering metal; it exists as a layered crystalline solid with notable anisotropic properties. In industrial applications, CoCl₂ serves primarily as a chemical intermediate in cobalt metal production, a desiccant and humidity indicator in packaging and laboratory settings, and a precursor in catalysis and electrochemistry research. Its low exfoliation energy suggests potential for 2D materials research and thin-film applications, though it is not commonly selected as a structural engineering material—instead, engineers encounter it in chemical processing, analytical instrumentation, and emerging energy storage or electronic device contexts.
CoCN₂ is a cobalt-based interstitial nitride compound that combines cobalt with nitrogen in a specific stoichiometric ratio. This material belongs to the family of transition metal nitrides, which are known for exceptional hardness and thermal stability. While CoCN₂ is primarily of research and development interest rather than a widespread industrial standard, cobalt nitrides show promise in applications requiring wear resistance and high-temperature performance, offering potential advantages over conventional cobalt alloys in specialized coating and cutting tool applications.
CoCoN3 is a cobalt-based intermetallic nitride compound combining cobalt with nitrogen in a 1:3 stoichiometric ratio. This material represents an emerging research compound in the high-performance metal-ceramic family, investigated primarily for extreme environment applications where conventional superalloys reach their thermal or chemical limits. CoCoN3 and related cobalt nitrides are being explored in advanced catalysis, high-temperature structural applications, and potentially as wear-resistant coatings, though industrial adoption remains limited pending validation of manufacturability and cost-benefit analysis against established alternatives.
CoCr (cobalt-chromium) is a high-performance alloy system known for exceptional biocompatibility, corrosion resistance, and strength retention at elevated temperatures. Widely used in medical implants, dental prosthetics, and aerospace components, CoCr alloys are preferred where body tolerance and durability are critical, or where traditional stainless steels fall short in aggressive environments. The material's superior wear resistance and fatigue strength make it a standard choice over alternatives like titanium when long-term implant performance or high-temperature stability is the priority.
CoCrAl is a cobalt-chromium-aluminum intermetallic alloy that combines the high-temperature strength of cobalt-chromium systems with aluminum's lightweight contribution, positioning it within the family of advanced superalloys and intermetallics. This material is primarily pursued in aerospace and turbomachinery applications where exceptional creep resistance, oxidation resistance, and strength retention at elevated temperatures are critical, particularly as a potential alternative to nickel-based superalloys in specific high-temperature engine components and thermal barrier coating systems.
CoCrAs is a cobalt-chromium-arsenic intermetallic compound or alloy belonging to the cobalt-chromium family of materials. While not a mainstream commercial alloy, this composition represents a research-stage material exploring the effects of arsenic addition to Co-Cr systems, potentially aimed at modifying magnetic, thermal, or mechanical properties for specialized applications. Engineers would encounter this material primarily in academic literature or experimental development rather than in established industrial production.
CoCrGa is a cobalt-chromium-gallium intermetallic compound, a member of the Heusler alloy family known for ferromagnetic properties and potential high-temperature performance. This material remains primarily in the research phase, with investigations focused on magnetic applications and potential aerospace or advanced energy device use where cobalt-based intermetallics offer advantages over conventional ferrous alloys. Engineers considering this material should recognize it as an emerging compound rather than an established industrial workhorse; its adoption depends on demonstrating manufacturability, workability, and cost-effectiveness relative to proven Co-Cr systems and other magnetic intermetallics.
CoCrGe is a cobalt-chromium-germanium ternary alloy that combines the high-temperature strength and corrosion resistance of cobalt-chromium base systems with germanium addition. This material is primarily of research interest for applications requiring enhanced hardness, wear resistance, or specialized magnetic properties, as germanium can modify phase stability and solid-solution strengthening in cobalt-based matrices. CoCrGe alloys are not yet widely established in mainstream production but are investigated for advanced aerospace, wear-resistant coating, and potentially biomedical applications where the corrosion performance of Co-Cr is valued.
CoCrIn is a cobalt-chromium-indium alloy belonging to the cobalt-based superalloy family, though this specific composition is not widely established in standard engineering databases and may represent a specialized or research-phase material. The addition of indium to cobalt-chromium systems is typically explored to modify phase stability, creep resistance, or corrosion behavior in high-temperature applications. Without confirmed industrial adoption data, this composition appears most relevant to materials research contexts seeking tailored properties for demanding thermal or corrosive environments, such as aerospace component development or medical device optimization.
CoCr printed by laser powder bed fusion is a cobalt-chromium alloy built by selectively melting fine metal powder layer by layer under inert gas. Rapid solidification gives a fine cellular microstructure, often textured along the build direction, so properties can differ between horizontal and vertical builds. Residual stress is high, so parts are usually stress relieved on the build plate and supports are removed afterward. Surfaces are rough as printed, and critical faces are machined or polished. Typical uses are dental frameworks, medical components with complex geometry, and wear-resistant or high-temperature industrial parts.
3D Systems LaserForm CoCrF75 (A) is a cobalt-chromium-molybdenum alloy powder grade that laser powder bed fusion processes into dense metal parts. Rapid melt-pool solidification gives a very fine cellular-dendritic microstructure, with higher as-built strength and lower ductility than cast material and considerable residual stress, so parts are usually stress relieved on the build plate before removal. Overhangs need supports that are cut away afterwards. The rough as-built surface is commonly machined, blasted or polished, sometimes after hot isostatic pressing or solution heat treatment to homogenise the structure. Printed parts in it are used for dental frameworks and crowns, orthopaedic and other medical components, and heat- and wear-resistant industrial parts. Every value on this page is read from 3D Systems' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
3D Systems LaserForm CoCrF75 (A) is a cobalt-chromium-molybdenum alloy grade printed by laser powder bed fusion, here in the annealed condition. Laser melting leaves this alloy with a very fine cellular structure, high residual stress, some anisotropy between build directions and a rough surface, and parts need supports that are cut or machined off. Annealing relieves the residual stress and homogenizes the as-built structure, giving up some strength for greater ductility. Printed parts are used for dental frameworks, medical device components and wear- and corrosion-resistant industrial parts of complex shape. Every value on this page is read from 3D Systems' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
3D Systems LaserForm CoCrF75 (A) is a cobalt-chromium-molybdenum alloy grade made by laser powder bed fusion, here in the hot isostatically pressed condition. As built, the alloy has a fine cellular solidification structure, residual stress from layerwise melting, some anisotropy between build directions and a rough, support-marked surface. Hot isostatic pressing closes internal porosity, relieves residual stress and homogenizes the microstructure, giving more consistent ductility and fatigue behaviour. Surface roughness and surface-connected pores remain, so parts still need machining or polishing. Parts in this condition are used for orthopaedic and dental components, wear surfaces and high-temperature industrial parts. Every value on this page is read from 3D Systems' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Colibrium Additive CoCrMo in the as-built condition is the maker's cobalt-chromium-molybdenum grade printed by laser powder bed fusion, with no heat treatment after the build. Rapid solidification gives a fine cellular structure with columnar grains along the build direction, so strength is high, ductility is limited and properties differ between build directions. Parts carry residual stress, need supports and have rough surfaces, so stress relief, support removal and finishing usually follow. The grade is used for dental frameworks, orthopaedic components and wear- and corrosion-resistant industrial parts. Every value on this page is read from Colibrium Additive's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Colibrium Additive CoCrMo in the HIP condition is that maker's cobalt-chromium-molybdenum grade, printed by laser powder bed fusion and then hot isostatically pressed. As built, it has a fine cellular structure with grains elongated along the build direction, residual stress and some internal porosity. HIP closes internal pores not connected to the surface, relieves residual stress and recrystallizes the structure, reducing anisotropy and improving ductility and fatigue resistance at some cost in strength. Supports still have to be removed, and the rough printed surface is unchanged and needs machining or polishing. Parts are used for wear- and corrosion-resistant orthopaedic and dental components and high-temperature aerospace parts. Every value on this page is read from Colibrium Additive's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
EOS CobaltChrome MP1 is a cobalt-chromium-molybdenum alloy powder grade processed by laser powder bed fusion, in which a laser melts thin layers of the powder to build dense metal parts. Rapid solidification gives a very fine cellular microstructure in the as-built state, along with high residual stresses that call for a stress-relief heat treatment, usually before parts are cut from the build plate. Overhangs need supports, and the rough as-built surface is commonly blasted, machined or polished where fit or finish matters. Printed parts in this grade are used for dental crown and bridge frameworks, medical device components, and wear- and heat-resistant parts for turbines and engines. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
EOS CobaltChrome MP1 is a cobalt-chromium-molybdenum alloy powder grade printed by laser powder bed fusion, here in the as-built state without heat treatment. Rapid melt-pool solidification gives a very fine cellular microstructure, largely metastable face-centred cubic, with high strength, limited ductility and some anisotropy between build directions. Parts carry residual stress, need supports on overhangs and have a rough surface, so they are usually stress relieved before removal from the plate and finished by blasting, machining or polishing. Typical uses are dental crown and bridge frameworks, medical device components and wear- or heat-loaded engine parts. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
EOS CobaltChrome MP1 is a cobalt-chromium-molybdenum powder grade processed by laser powder bed fusion, here in the heat-treated condition. As built, it has a very fine cellular solidification structure, largely metastable face-centred cubic, with high residual stress and some anisotropy between build directions. Heat treatment, usually done before parts are cut from the build plate, relieves these stresses and homogenizes the microstructure, limiting distortion and directional differences. Supports must still be removed and functional surfaces machined or polished. Typical uses are dental frameworks, implant-type components and wear- or heat-resistant engine parts. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Renishaw CoCr-0404 is a cobalt-chromium alloy powder grade from Renishaw, processed by laser powder bed fusion. Rapid solidification of the melt pool gives the as-built alloy a fine cellular-dendritic microstructure, retained largely as metastable face-centred cubic phase, with higher strength than cast material. Parts carry significant residual stress, so they need supports and a stress-relief heat treatment before removal from the build plate. The as-built surface is rough, and functional surfaces are usually machined or polished. Printed parts are used for dental crown, bridge and partial denture frameworks, medical device components, and wear- and heat-resistant parts. Every value on this page is read from Renishaw's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Renishaw CoCr-0404 printed by laser powder bed fusion and solution-treated is a cobalt-chromium-molybdenum alloy grade given a high-temperature solution heat treatment after printing. As built, rapid solidification leaves a fine cellular structure with segregation at cell boundaries, grains elongated along the build direction and high residual stress, so parts need supports and stress relief before removal from the plate. Solution treatment homogenises this structure, relieves stress and reduces anisotropy, trading some as-built strength for ductility. Rough surfaces still need machining or polishing. It is used for dental frameworks, orthopaedic components and wear-resistant industrial parts. Every value on this page is read from Renishaw's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
CoCrN3 is a cobalt-chromium nitride compound belonging to the family of transition metal nitrides, which are interstitial ceramic materials known for high hardness and wear resistance. This material is primarily investigated in research and coating applications where extreme surface hardness, corrosion resistance, and thermal stability are required; it represents an emerging alternative to conventional hard coatings like CrN and TiN, particularly for applications demanding both wear protection and chemical resistance in demanding environments.
CoCrP is a cobalt-chromium-based alloy, likely a variant within the cobalt-chromium family that incorporates phosphorus as an alloying element. This material is typically developed for biomedical or wear-resistant applications where corrosion resistance and mechanical strength are critical. The addition of phosphorus may enhance hardness, wear resistance, or corrosion performance compared to conventional CoCr alloys, though CoCrP compositions remain less common than established CoCr standards and may represent a specialized or emerging formulation.
CoCrSb is a cobalt-chromium-antimony intermetallic compound belonging to the family of refractory and high-performance metallic materials. This material is primarily explored in research contexts for applications requiring enhanced hardness, wear resistance, and thermal stability, particularly as a candidate for coating systems, cutting tool applications, or specialized high-temperature environments where conventional cobalt-chromium alloys reach their limits.
CoCrSi is a cobalt-chromium-silicon ternary alloy that combines the wear and corrosion resistance of cobalt-chromium systems with silicon additions for enhanced hardness and oxidation resistance. This material family is primarily investigated for high-temperature structural applications and wear-resistant coatings, offering potential advantages over binary CoCr alloys in demanding environments where both mechanical strength and thermal stability are critical. The silicon addition makes it particularly relevant for applications requiring sustained performance above moderate temperatures or in corrosive/erosive conditions.
CoCrSn is a ternary cobalt-chromium-tin alloy combining the corrosion resistance and strength of cobalt-chromium systems with tin's contributions to wear resistance and potential hardening effects. This material family is primarily investigated for biomedical applications (particularly orthopedic and dental implants) and wear-resistant coatings, where the cobalt-chromium base provides proven biocompatibility and the tin addition aims to enhance surface hardness and reduce friction; it represents a research-driven refinement of established CoCr alloys rather than a commodity material.