436 materials
Nikon SLM Solutions Ti6Al4V ELI (Grade 23) is that maker's extra-low-interstitial Ti-6Al-4V grade, printed by laser powder bed fusion and annealed. As built, the alloy has columnar prior-beta grains along the build direction filled with fine acicular martensite, and high residual stress. Annealing relieves that stress and decomposes the martensite into a fine alpha-beta structure, improving ductility, but does not close porosity, so fatigue-critical parts are often also hot isostatically pressed. Parts need supports, and their rough surfaces are usually machined. It is used for aerospace brackets and orthopaedic and dental implant components, including porous lattices. Every value on this page is read from Nikon SLM Solutions' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Nikon SLM Solutions Ti6Al4V ELI (Grade 23), as-built, is that maker's grade of extra-low-interstitial Ti-6Al-4V printed by laser powder bed fusion and left without heat treatment. Rapid solidification gives fine acicular alpha-prime martensite in columnar prior-beta grains along the build direction, so the material is strong but less ductile and somewhat anisotropic. Parts carry high residual stress, need supports and have rough surfaces, so they are usually stress relieved on the plate and often hot isostatically pressed and machined. Typical uses are porous orthopedic implants and lightweight aerospace components. Every value on this page is read from Nikon SLM Solutions' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Nikon SLM Solutions Ti6Al4V ELI (Grade 23), heat-treated, is that maker's extra-low-interstitial Ti-6Al-4V grade, built by laser powder bed fusion and heat-treated after printing. As printed, rapid solidification produces fine acicular alpha-prime martensite in columnar prior-beta grains along the build direction, with high residual stress and limited ductility. Heat treatment relieves the stress and transforms the martensite into a fine alpha-beta structure with better ductility, but supports and rough surfaces still need removal or machining. Printed parts are used for orthopedic implant components, lattice structures and lightweight aerospace brackets. Every value on this page is read from Nikon SLM Solutions' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Nikon SLM Solutions Ti6Al4V ELI (Grade 23) is that maker's extra-low-interstitial Ti-6Al-4V grade, printed by laser powder bed fusion and then hot isostatically pressed. As built, rapid cooling gives fine acicular martensite in columnar prior-beta grains along the build direction, with residual stress and scattered porosity. HIP closes internal pores and coarsens the martensite into a lamellar alpha-beta structure, improving ductility and fatigue life at some cost in strength. It does not remove the rough surface or close surface-connected pores, so parts are usually machined after support removal. It is used for implant components, aerospace brackets and other fatigue-loaded titanium parts. Every value on this page is read from Nikon SLM Solutions' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
EOS Titanium Ti64 Grade 5 is a Ti-6Al-4V grade for laser powder bed fusion, in which a laser melts the alloy powder layer by layer under inert gas. Rapid solidification leaves fine acicular martensite within columnar prior-beta grains along the build direction, with high residual stress and some anisotropy. Parts are normally stress-relieved before removal from the plate and supports. They are often hot isostatically pressed to close porosity and improve ductility and fatigue strength, and fatigue-critical surfaces are machined. Printed parts serve as lightweight aerospace brackets, medical implant components and complex industrial parts. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
EOS Titanium Ti64 Grade 5, heat-treated, is Ti-6Al-4V powder from EOS that has been built by laser powder bed fusion and then heat-treated. As built, the alloy forms columnar prior-beta grains along the build direction, filled with fine acicular martensite, and it carries high residual stress and limited ductility. Heat treatment relieves those stresses and turns the martensite into a fine lamellar alpha-beta structure, which raises ductility at some cost in strength. The columnar grains and any internal porosity remain. Parts still need support removal and surface finishing, and are used for lightweight aerospace brackets, motorsport parts and lattice structures in medical devices. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Farsoon Ti6Al4V is Farsoon's grade of Ti-6Al-4V powder for laser powder bed fusion, where a laser melts the alloy layer by layer under inert gas. Rapid cooling gives a fine martensitic alpha-prime structure in columnar prior-beta grains along the build direction, so as-built parts are strong but of limited ductility and somewhat anisotropic. High residual stress means parts are stress relieved before removal from the plate, and hot isostatic pressing is often added to close porosity and coarsen the structure for fatigue. Supports are then cut away and rough surfaces machined. Printed parts serve as lightweight aerospace brackets, lattice-structured medical implants and motorsport components. Every value on this page is read from Farsoon's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Farsoon Ti6Al4V, heat-treated, is that maker's grade of Ti-6Al-4V titanium alloy printed by laser powder bed fusion and heat treated after the build. As printed, the alloy has columnar prior-beta grains along the build direction filled with fine acicular martensite, high residual stress and limited ductility. Heat treatment relieves the stress and decomposes the martensite into a fine alpha-beta structure, improving ductility at some cost in strength, though it does not close internal porosity. Parts need supports and machining or finishing of the rough surface. Typical uses are lightweight aerospace brackets, medical device components and other complex high-performance parts. Every value on this page is read from Farsoon's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Velo3D Ti-6Al-4V is Velo3D's grade of the titanium alloy, a powder and parameter set for building parts by laser powder bed fusion. Rapid solidification gives a fine martensitic alpha-prime structure in columnar prior-beta grains along the build direction, with some anisotropy between orientations and high residual stress. Parts are usually stress relieved on the build plate, often hot isostatically pressed to close porosity and improve fatigue strength, and machined where the rough as-built surface and support marks matter. Typical uses are lightweight brackets, manifolds and other complex titanium parts for aerospace, space and high-performance industrial equipment. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Velo3D Ti-6Al-4V is that maker's grade of the alpha-beta titanium alloy made by laser powder bed fusion, here in the annealed condition. As built, rapid solidification gives columnar prior-beta grains along the build direction filled with fine acicular martensite, plus high residual stress and a rough surface. Annealing relieves the stress and turns the martensite into a fine alpha-beta structure with better ductility, though some anisotropy between build directions remains. Parts are typically machined on critical surfaces and may be hot isostatically pressed for fatigue-loaded service. They serve as lightweight aerospace brackets, ducts, manifolds and other complex titanium components. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Velo3D Ti-6Al-4V is the maker's grade of Ti-6Al-4V titanium alloy printed by laser powder bed fusion, here in the hot isostatically pressed condition. As built, it forms columnar prior-beta grains along the build direction filled with fine acicular martensite, and it carries residual stress and some internal porosity. HIP closes the internal pores and coarsens the martensite into a lamellar alpha-beta structure, which improves ductility and fatigue life. Surface-connected porosity and the rough as-printed surface remain, so they are usually machined or finished. Printed parts include lightweight brackets, housings and fluid components for aerospace, space and other demanding applications. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Xact Metal Ti-6Al-4V Grade 5 (Linde) is a Grade 5 titanium alloy powder that Xact Metal offers for laser powder bed fusion. As built, the rapid solidification gives fine acicular martensite inside columnar prior-beta grains elongated along the build direction, which makes properties anisotropic and leaves high residual stress. Parts are usually stress relieved before removal from the build plate, often hot isostatically pressed to close porosity and improve fatigue, and machined where the rough, support-marked surface matters. Printed parts serve as lightweight aerospace brackets and housings, lattice structures and medical device components. Every value on this page is read from Xact Metal's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Xact Metal Ti-6Al-4V Grade 5 (Linde) is a Grade 5 titanium alloy printed by laser powder bed fusion, here in the stress-relieved condition. As printed, rapid solidification gives a fine acicular martensitic structure in columnar prior-beta grains along the build direction, with high residual stress, rough surfaces and a need for supports. Stress relief, usually done before parts are cut from the build plate, limits distortion and partly tempers the martensite but does not close porosity, so fatigue-critical parts are often also hot isostatically pressed. Typical parts are lightweight aerospace brackets, motorsport components and medical devices. Every value on this page is read from Xact Metal's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Meltio Titanium 64 is a Ti-6Al-4V wire feedstock printed by wire-feed laser directed energy deposition, where a laser melts the wire into tracks built up layer by layer under inert gas shielding. Repeated melting and reheating give coarse columnar prior-beta grains elongated along the build direction with a fine lamellar alpha-beta structure inside, so properties differ between build directions. Deposits are near-net shapes with a wavy, rough surface and residual stress, and are normally stress relieved and machined to final dimensions. Typical uses are near-net preforms for machined aerospace and industrial parts, repair of titanium components, and adding features to existing parts. Every value on this page is read from Meltio's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Meltio Titanium 64 in the as-built condition is Ti-6Al-4V wire deposited by laser wire-feed directed energy deposition and left without heat treatment. Layer-by-layer solidification produces coarse columnar prior-beta grains along the build direction with fine acicular alpha inside, so strength and ductility differ between build directions. Parts carry residual stress and a wavy, stepped surface, so they are near-net shapes that are machined and usually stress relieved before service. Typical uses are large titanium preforms, features added to existing parts and repair of titanium components, often on hybrid machines that deposit and machine in one setup. Every value on this page is read from Meltio's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Meltio Titanium 64 is Meltio's Ti-6Al-4V wire printed by laser wire-feed directed energy deposition, here in the heat-treated condition. Deposited bead by bead, it forms dense near-net shapes with columnar prior-beta grains along the build direction, fine martensitic alpha laths, residual stress and a rippled surface that is machined off. Heat treatment relieves the stress and transforms the martensite into a more ductile alpha-beta structure, while the columnar grains and their anisotropy largely remain. Typical parts are large titanium preforms and structural components finished by machining, often on hybrid machines, as well as repairs and features added to existing titanium parts. Every value on this page is read from Meltio's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.