Inconel 625 (L-PBF, Colibrium Additive Nickel 625, as-built) — Properties & Data | MatWorld

Inconel 625 (L-PBF, Colibrium Additive Nickel 625, as-built)

UNS N06625· Nickel 625

Colibrium Additive Nickel 625 is the maker's Inconel 625 grade for laser powder bed fusion, here as-built, without post-print heat treatment. Rapid melt-pool solidification gives a fine cellular-dendritic structure, columnar grains along the build direction and niobium and molybdenum segregation at cell boundaries, making properties orientation-dependent. Parts carry high residual stress, are anchored to the plate by supports and have rough down-facing surfaces, so stress relief, plate removal and often hot isostatic pressing or solution annealing and machining follow. Printed parts serve as heat- and corrosion-resistant components with internal channels, such as heat exchangers and combustion hardware. Every value on this page is read from Colibrium Additive's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

heat exchangerscombustion hardware

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 625 (L-PBF)/Inconel 625 (L-PBF, Colibrium Additive Nickel 625, as-built)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Table

Orientation

Property	Value	Unit	Conditions
Elongation at Break(εf)4 entries	40.00	%	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · XY
↳	42.50	%	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · Z
↳	37.00	%	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · XY
↳	42.50	%	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · Z
Hardness (Vickers)(HV)2 entries	268	HV	Balanced Parameter 140 – 400 W / 60 µm · as-built · XY
↳	292	HV	Surface Parameter 169 – 400 W / 30 µm · as-built · XY
Ultimate Tensile Strength(σUTS)4 entries	940.0	MPa	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · XY
↳	880.0	MPa	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · Z
↳	980.0	MPa	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · XY
↳	890.0	MPa	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · Z
Yield Strength (0.2% offset)(σy)4 entries	640.0	MPa	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · XY
↳	575.0	MPa	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · Z
↳	710.0	MPa	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · XY
↳	625.0	MPa	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · Z
Young's Modulus(E)4 entries	178.0	GPa	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · XY
↳	133.0	GPa	Balanced Parameter 140 – 400 W / 60 µm · as-built · ASTM E8 · Z
↳	168.0	GPa	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · XY
↳	138.0	GPa	Surface Parameter 169 – 400 W / 30 µm · as-built · ASTM E8 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.442	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.