17-4PH Stainless Steel (L-PBF, Colibrium Additive Stainless Steel 17-4PH, aged) — Properties & Data | MatWorld

17-4PH Stainless Steel (L-PBF, Colibrium Additive Stainless Steel 17-4PH, aged)

UNS S17400· Stainless Steel 17-4PH

Colibrium Additive Stainless Steel 17-4PH is that maker's grade of the precipitation-hardening martensitic stainless steel, made by laser powder bed fusion and here in the aged condition. Rapid solidification leaves a fine cellular structure, residual stress and often much retained austenite, so parts are stress relieved before removal from the plate and usually solution treated before aging. Aging precipitates fine copper-rich particles that raise strength and hardness, though rough surfaces, support marks and some anisotropy between build directions remain. Parts include brackets, housings, tooling and fluid-handling components needing strength with moderate corrosion resistance. Every value on this page is read from Colibrium Additive's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

bracketshousingstoolingfluid-handling components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

17-4PH Stainless Steel (L-PBF)/17-4PH Stainless Steel (L-PBF, Colibrium Additive Stainless Steel 17-4PH, aged)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Table

Orientation

Property	Value	Unit	Conditions
Elongation at Break(εf)2 entries	10.50	%	Balanced Parameter 404 - 400 W / 50 µm · aged · ASTM E8 · XY
↳	9.500	%	Balanced Parameter 404 - 400 W / 50 µm · aged · ASTM E8 · Z
Hardness (Vickers)(HV)3 entries	452	HV	Balanced Parameter 303 - 400 W / 50 µm · aged · XY
↳	467	HV	Balanced Parameter 404 - 400 W / 50 µm · aged · XY
↳	451	HV	Productivity Parameter 302 - 400 W / 80 µm · aged · XY
Reduction of Area(RA)2 entries	39.00	%	Balanced Parameter 404 - 400 W / 50 µm · aged · ASTM E8 · XY
↳	29.00	%	Balanced Parameter 404 - 400 W / 50 µm · aged · ASTM E8 · Z
Ultimate Tensile Strength(σUTS)	206 – 216.1	ksi	10 entriesClick to expand
Yield Strength (0.2% offset)(σy)	185.6 – 192.9	ksi	10 entriesClick to expand
Young's Modulus(E)	27,557.2 – 29,152.6	ksi	10 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.2820	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.