Ti-6Al-4V (L-PBF, Xact Metal Ti-6Al-4V Grade 5 (Linde)) — Properties & Data | MatWorld

Ti-6Al-4V (L-PBF, Xact Metal Ti-6Al-4V Grade 5 (Linde))

UNS R56400· Ti-6Al-4V Grade 5 (Linde)

Xact Metal Ti-6Al-4V Grade 5 (Linde) is a Grade 5 titanium alloy powder that Xact Metal offers for laser powder bed fusion. As built, the rapid solidification gives fine acicular martensite inside columnar prior-beta grains elongated along the build direction, which makes properties anisotropic and leaves high residual stress. Parts are usually stress relieved before removal from the build plate, often hot isostatically pressed to close porosity and improve fatigue, and machined where the rough, support-marked surface matters. Printed parts serve as lightweight aerospace brackets and housings, lattice structures and medical device components. Every value on this page is read from Xact Metal's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

aerospace bracketsaerospace housingslattice structuresmedical device components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Ti-6Al-4V (L-PBF)/Ti-6Al-4V (L-PBF, Xact Metal Ti-6Al-4V Grade 5 (Linde))

Units:

si imperial

Property	Value	Unit	Conditions	Source
Melting Point / Solidus(Tm)	3,461.6 range 3,412.1–3,511.1	°F	General Wrought Material Data
Thermal Conductivity(k)	4.160	BTU/(hr·ft·°F)	General Wrought Material Data

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.1600	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.