Ti-6Al-4V (L-PBF, Velo3D Ti-6Al-4V, HIP) — Properties & Data | MatWorld

Ti-6Al-4V (L-PBF, Velo3D Ti-6Al-4V, HIP)

UNS R56400· Ti-6Al-4V

Velo3D Ti-6Al-4V is the maker's grade of Ti-6Al-4V titanium alloy printed by laser powder bed fusion, here in the hot isostatically pressed condition. As built, it forms columnar prior-beta grains along the build direction filled with fine acicular martensite, and it carries residual stress and some internal porosity. HIP closes the internal pores and coarsens the martensite into a lamellar alpha-beta structure, which improves ductility and fatigue life. Surface-connected porosity and the rough as-printed surface remain, so they are usually machined or finished. Printed parts include lightweight brackets, housings and fluid components for aerospace, space and other demanding applications. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

lightweight bracketshousingsfluid componentsaerospace applicationsspace applications

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Ti-6Al-4V (L-PBF)/Ti-6Al-4V (L-PBF, Velo3D Ti-6Al-4V, HIP)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Table

Orientation

Property	Value	Unit	Conditions
Elongation at Break(εf)	13.50 – 19.80	%	6 entriesClick to expand
Ultimate Tensile Strength(σUTS)	0.9100 – 1.001	GPa	6 entriesClick to expand
Yield Strength (0.2% offset)(σy)	720.0 – 840.0	MPa	6 entriesClick to expand
Young's Modulus(E)2 entries	111.0 range 100.0–122.0	GPa	Grade 23 · HIP
↳	109.5 range 101.0–118.0	GPa	Grade 5 · HIP · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	4.429	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.