Ti-5Al-2.5Sn Annealed
VerifiedmetalTi-5Al-2.5Sn is a near-alpha titanium alloy used primarily in aircraft engines and high-temperature aerospace applications, offering good creep resistance and tensile strength up to approximately 600°F. The annealed condition provides optimal ductility and dimensional stability after hot forming operations, with yield strength around 70-90 ksi and excellent damage tolerance characteristics.
cryogenicweldablehydrogen servicegas bottlesairframe forgings
Compliance & Regulations
?ITAR?EAR?ISO 10993?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
Thickness
e/D Ratio
Basis
Orientation
Specification
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | — | Pa | 17 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | — | Pa | 17 entriesClick to expand | ||
Compressive Modulus(Ec) | Curve (12 pts) | Pa | L | — | |
Compressive Yield Strength(Fcy) | — | Pa | 17 entriesClick to expand | ||
Elongation at Break(εf) | — | - | 25 entriesClick to expand | ||
Fatigue Crack Growth Rate(da/dN) | — | m/cycle | 6 entriesClick to expand | ||
Reduction of Area(RA) | — | - | 8 entriesClick to expand | ||
Ultimate Shear Strength(Fsu) | — | Pa | 9 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | — | Pa | 32 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | — | Pa | 32 entriesClick to expand | ||
Young's Modulus(E) | Curve (12 pts) | Pa | L | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (6 pts) | 1/K | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (20 pts) | J/(kg·K) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (6 pts) | W/(m·K) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.