Inconel 625 (L-PBF, Velo3D Inconel 625, as-built) — Properties & Data | MatWorld

Inconel 625 (L-PBF, Velo3D Inconel 625, as-built)

UNS N06625· Inconel 625

Velo3D Inconel 625 as-built is the maker's grade of the nickel-chromium-molybdenum-niobium alloy UNS N06625 printed by laser powder bed fusion, with no heat treatment after printing. Rapid solidification gives a fine cellular-dendritic structure with columnar grains along the build direction and niobium and molybdenum segregated to cell boundaries, which makes its properties anisotropic. Parts carry residual stress and a rough surface. They are normally stress relieved before removal from the build plate, often followed by annealing or hot isostatic pressing. Uses include heat exchangers, manifolds and combustion hardware for chemical, marine and aerospace service. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

heat exchangersmanifoldscombustion hardware

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 625 (L-PBF)/Inconel 625 (L-PBF, Velo3D Inconel 625, as-built)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Table

Property	Value	Unit	Conditions
Elongation at Break(εf)4 entries	42.70	%	500W/50 µm · as-built · ASTM E8 · Z
↳	41.50	%	500W/50 µm · minimum · as-built · ASTM E8 · Z
↳	41.70	%	1kW/50 µm · as-built · ASTM E8 · Z
↳	40.00	%	1kW/50 µm · minimum · as-built · ASTM E8 · Z
Ultimate Tensile Strength(σUTS)4 entries	137.1	ksi	500W/50 µm · as-built · ASTM E8 · Z
↳	136.3	ksi	500W/50 µm · minimum · as-built · ASTM E8 · Z
↳	126.9	ksi	1kW/50 µm · as-built · ASTM E8 · Z
↳	126.2	ksi	1kW/50 µm · minimum · as-built · ASTM E8 · Z
Yield Strength (0.2% offset)(σy)4 entries	93.40	ksi	500W/50 µm · as-built · ASTM E8 · Z
↳	92.82	ksi	500W/50 µm · minimum · as-built · ASTM E8 · Z
↳	83.54	ksi	1kW/50 µm · as-built · ASTM E8 · Z
↳	81.22	ksi	1kW/50 µm · minimum · as-built · ASTM E8 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.3050	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.