Inconel 625 (L-PBF, Nikon SLM Solutions IN625, annealed) — Properties & Data | MatWorld

Inconel 625 (L-PBF, Nikon SLM Solutions IN625, annealed)

UNS N06625· IN625

Nikon SLM Solutions IN625 is that maker's grade of Inconel 625, a nickel-chromium-molybdenum-niobium alloy, for laser powder bed fusion, here annealed. As printed it has a fine cellular structure with niobium and molybdenum segregated to cell boundaries, grains elongated along the build direction and high residual stress, so parts need supports and stress relief before removal from the plate. Annealing relieves that stress and dissolves much of the segregation, lowering strength but raising ductility and reducing anisotropy. Parts serve as heat exchangers, combustor and exhaust hardware, manifolds and corrosion-resistant chemical and marine components with internal channels. Every value on this page is read from Nikon SLM Solutions' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

heat exchangerscombustor hardwareexhaust hardwaremanifoldscorrosion-resistant chemical componentscorrosion-resistant marine components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 625 (L-PBF)/Inconel 625 (L-PBF, Nikon SLM Solutions IN625, annealed)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Table

Orientation

Specification

Property	Value	Unit	Conditions
Elongation at Break(εf)	31.00 – 52.00	%	32 entriesClick to expand
Hardness (Vickers)(HV)	205 – 290	HV	16 entriesClick to expand
Ultimate Tensile Strength(σUTS)	0.8300 – 1.010	GPa	32 entriesClick to expand
Yield Strength (0.2% offset)(σy)	415.0 – 680.0	MPa	32 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.442	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.