Inconel 625 (L-PBF, as-built) — Properties & Data | MatWorld

Inconel 625 (L-PBF, as-built)

UNS N06625

Inconel 625 in the as-built condition is the nickel-chromium-molybdenum-niobium alloy exactly as it leaves the L-PBF machine, before stress relief, hot isostatic pressing or solution treatment. Rapid solidification gives fine cellular-dendritic grains, often elongated along the build direction, with niobium and molybdenum segregated between cells, so properties can vary with orientation. High residual stress can distort parts once they are cut from the plate, and surfaces are rough with supports to remove. The state is mainly a starting point for heat treatment and machining of parts for corrosion- and heat-exposed service, such as ducting and heat exchangers.

ductingheat exchangers

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Inconel 625 (L-PBF)/Inconel 625 (L-PBF, as-built)

Units:

si imperial

Property OverviewNormalized to typical max values

13 interactive curves for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Filter by

Source

Machine

Build Angle

Scan Strategy

Strain Rate

Orientation

Property	Value	Unit	Conditions
Elongation at Break(εf)	31.03 – 69.75	%	13 entriesClick to expand
Stress–Strain Curve(σ–ε)	—	Pa	13 entriesClick to expand
Ultimate Tensile Strength(σUTS)	0.7848 – 1.042	GPa	13 entriesClick to expand
Yield Strength (0.2% offset)(σy)	618.1 – 833.7	MPa	13 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.442	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.