Custom 465 Stainless Steel
VerifiedmetalCustom 465 is a precipitation-hardenable martensitic stainless steel (13% Cr, 8% Ni, 2% Mo, 1% Al, Ti) designed for high-strength aerospace applications requiring excellent fatigue resistance and corrosion resistance in moderately aggressive environments. The H1000 and H950 conditions achieve yield strengths of 1380 MPa and 1310 MPa respectively through controlled precipitation hardening, with maintained toughness at cryogenic temperatures suitable for rocket motor casings and fasteners.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Bar | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Bar | — | |
Young's Modulus(E) | — | ksi | 22°C · Bar | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (17 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (17 pts) | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.