CdInS2
ceramic· JVASP-14309· CdInS2
CdInS2 is a ternary semiconductor ceramic compound combining cadmium, indium, and sulfur in a chalcopyrite crystal structure. It is primarily a research material investigated for optoelectronic and photovoltaic applications, particularly in thin-film solar cells and photodetectors operating in the visible-to-near-infrared spectrum. Engineers consider CdInS2 as an alternative to binary semiconductors (like CdS or InP) when seeking tunable bandgap properties and improved light absorption efficiency, though commercial adoption remains limited compared to established III-V semiconductors and perovskite compounds.
thin-film solar cellsphotodetectorsoptoelectronic devicesbandgap engineeringsemiconductor research
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — median of 2 measurements | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.