C86500 Manganese Bronze As cast

Verifiedmetal

C86500 Manganese Bronze is a copper-zinc-manganese-iron alloy cast in as-cast condition, providing moderate strength (typically 40-50 ksi UTS) with good corrosion resistance and machinability for marine hardware, valve bodies, and pump impellers. The as-cast condition exhibits lower strength and ductility compared to heat-treated variants but offers improved castability and dimensional stability for complex geometries per AMS 4860.

aerospacestructural

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

C86500 Manganese Bronze/C86500 Manganese Bronze As cast

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Property	Value	Unit	Conditions
Elongation at Break(εf)	20.00	-	22°C · Sand and centrifugal casting · As cast · AMS 4860
Ultimate Tensile Strength(σUTS)	448.2	MPa	22°C · Sand and centrifugal casting · As cast · AMS 4860
Yield Strength (0.2% offset)(σy)	172.4	MPa	22°C · Sand and centrifugal casting · As cast · AMS 4860
Young's Modulus(E)	103.4	GPa	22°C · Sand and centrifugal casting

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.332	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

C86500 Manganese Bronze As cast

Mechanical Properties

Physical Properties

Regulatory Screening

Environmental