C86500 Manganese Bronze As cast
VerifiedmetalC86500 Manganese Bronze is a copper-zinc-manganese-iron alloy cast in as-cast condition, providing moderate strength (typically 40-50 ksi UTS) with good corrosion resistance and machinability for marine hardware, valve bodies, and pump impellers. The as-cast condition exhibits lower strength and ductility compared to heat-treated variants but offers improved castability and dimensional stability for complex geometries per AMS 4860.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Elongation at Break(εf) | — | - | 22°C · Sand and centrifugal casting · As cast · AMS 4860 | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 22°C · Sand and centrifugal casting · As cast · AMS 4860 | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | 22°C · Sand and centrifugal casting · As cast · AMS 4860 | — | |
Young's Modulus(E) | — | ksi | 22°C · Sand and centrifugal casting | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.