BAsP2
ceramic· JVASP-115283· BAsP2
BAsP2 is a boron arsenide phosphide ceramic compound, representing a mixed-anion semiconductor material in the III-V ceramic family. This material is primarily of research and development interest, investigated for advanced optoelectronic and thermal management applications where its wide bandgap and thermal properties offer potential advantages over conventional semiconductors. While not yet widely commercialized, materials in this class are explored for high-power electronics, UV optoelectronics, and specialized thermal conductivity applications where conventional alternatives reach performance limits.
experimental semiconductor researchwide-bandgap optoelectronicsthermal management substrateshigh-power electronicsUV light-emitting devicesadvanced composite matrices
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 86.78 | GPa | — | ||
Poisson's Ratio(ν) | 0.4600 | - | — | ||
Shear Modulus(G) | -8.090 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 3.691 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.4793 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.2526 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.