AM-350 stainless steel in the STA (solution-treated and aged) condition is a precipitation-hardenable martensitic stainless steel providing yield strengths in the 180–200 ksi range with good corrosion resistance and toughness for aerospace fasteners and components. The STA condition achieves a balance of strength and ductility through controlled heat treatment suitable for service to approximately 600°F.
Compliance & Regulations
8 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | Curve (9 pts) | ksi | — | ||
Bearing Yield Strength(Fbry) | Curve (12 pts) | ksi | — | ||
Compressive Modulus(Ec) | 30,000 | ksi | 22°C · Sheet/Strip | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (12 pts) | ksi | 21°C · L | ||
Compressive Yield Strength(Fcy) | Curve (13 pts) | ksi | L | ||
Poisson's Ratio(ν) | 0.3200 | - | 22°C | ||
Shear Modulus(G) | 11,000 | ksi | 22°C · Sheet/Strip | ||
Ultimate Shear Strength(Fsu) | Curve (13 pts) | ksi | — | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (6 pts) | ksi | 204°C · L | ||
Ultimate Tensile Strength(σUTS) | Curve (13 pts) | ksi | L | ||
Yield Strength (0.2% offset)(σy) | Curve (11 pts) | ksi | L | ||
Young's Modulus(E) | 29,000 | ksi | 22°C · Sheet/Strip |
1 interactive curve for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | µin/in·°F | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2820 | lb/in³ | 22°C |