AM-350 Stainless Steel
VerifiedmetalAM-350 is a precipitation-hardening martensitic stainless steel (17Cr-4.3Ni-2.6Mo-1.3Ti) designed for aerospace applications requiring high strength at elevated temperatures up to approximately 600°C with good corrosion resistance. The SCT 850 and stabilized (sta) tempers provide controlled hardness and dimensional stability through specific heat treatment cycles, making it suitable for jet engine compressor components and high-strength fasteners.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | Curve (9 pts) | Pa | — | — | |
Bearing Yield Strength(Fbry) | Curve (12 pts) | Pa | — | — | |
Compressive Modulus(Ec)2 entries | — | Pa | 22°C · Sheet/Strip | — | |
| ↳ | Curve (10 pts) | Pa | L | — | |
Compressive Tangent Modulus vs Stress(Etn(σ))4 entries | Curve (12 pts) | Pa | 21°C · L | — | |
| ↳ | Curve (12 pts) | Pa | 204°C · L | — | |
| ↳ | Curve (12 pts) | Pa | 316°C · L | — | |
| ↳ | Curve (11 pts) | Pa | 427°C · L | — | |
Compressive Yield Strength(Fcy) | Curve (13 pts) | Pa | L | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Sheet/Strip | — | |
Ultimate Shear Strength(Fsu) | Curve (13 pts) | Pa | — | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | Pa | 8 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | Curve (13 pts) | Pa | L | — | |
Yield Strength (0.2% offset)(σy) | Curve (11 pts) | Pa | L | — | |
Young's Modulus(E)2 entries | — | Pa | 22°C · Sheet/Strip | — | |
| ↳ | Curve (8 pts) | Pa | L | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | 1/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.