AISI 301 is an austenitic stainless steel (17-18% Cr, 6-8% Ni) with moderate corrosion resistance and high work-hardening capability, commonly used for springs, fasteners, and vibration-damping applications in aerospace and industrial equipment. The "sta" condition indicates a stress-relieved annealed temper that provides reduced residual stress while maintaining good ductility and fatigue resistance.
Compliance & Regulations
1 interactive curve for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | Curve (15 pts) | ksi | — | ||
Poisson's Ratio(ν) | 0.2700 | - | 22°C | ||
Shear Modulus(G) | 11,200 | ksi | 22°C · Sheet/Strip | ||
Young's Modulus(E) | 29,000 | ksi | 22°C · Sheet/Strip |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (21 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (21 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (21 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2860 | lb/in³ | 22°C |