AISI 1025 is a low-carbon steel (0.22–0.28% C) used in structural and mechanical applications requiring moderate strength and good machinability. Annealed and normalized conditions provide different strength levels and ductility characteristics, with the material offering adequate toughness for general engineering applications below 400°C.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | 90.00 | ksi | 22°C · Bar · All · ASTM A 108 · t=... in · e/D=2 | ||
Compressive Modulus(Ec) | 29,000 | ksi | 22°C · Sheet/Strip/Plate | ||
Compressive Yield Strength(Fcy)3 entries | 36.00 | ksi | 22°C · Bar · All · ASTM A 108 · L · t=... in | ||
| ↳ | 36.00 | ksi | 22°C · Bar · All · ASTM A 108 · LT · t=... in | ||
| ↳ | 36.00 | ksi | 22°C · Bar · All · ASTM A 108 · ST · t=... in | ||
Poisson's Ratio(ν) | 0.3200 | - | 22°C | ||
Shear Modulus(G) | 11,000 | ksi | 22°C · Sheet/Strip/Plate | ||
Ultimate Shear Strength(Fsu) | 35.00 | ksi | 22°C · Bar · All · ASTM A 108 · t=... in | ||
Ultimate Tensile Strength(σUTS)3 entries | 55.00 | ksi | 22°C · Bar · All · ASTM A 108 · L · t=... in | ||
| ↳ | 55.00 | ksi | 22°C · Bar · All · ASTM A 108 · LT · t=... in | ||
| ↳ | 55.00 | ksi | 22°C · Bar · All · ASTM A 108 · ST · t=... in | ||
Yield Strength (0.2% offset)(σy)3 entries | 36.00 | ksi | 22°C · Bar · All · ASTM A 108 · L · t=... in | ||
| ↳ | 36.00 | ksi | 22°C · Bar · All · ASTM A 108 · LT · t=... in | ||
| ↳ | 36.00 | ksi | 22°C · Bar · All · ASTM A 108 · ST · t=... in | ||
Young's Modulus(E) | 29,000 | ksi | 22°C · Sheet/Strip/Plate |
1 interactive curve for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (11 pts) | µin/in·°F | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2840 | lb/in³ | 22°C |