AISI 1025 Carbon Steel Annealed

Verifiedmetal

AISI 1025 is a low-carbon steel (0.22–0.28% C) with manganese content, used in structural applications, fasteners, and automotive components requiring moderate strength and good machinability. The annealed condition provides maximum ductility and minimum hardness (approximately 135–180 HV), making it suitable for cold-forming operations while sacrificing strength compared to work-hardened or normalized conditions.

aerospacestructural

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

AISI 1025 Carbon Steel/AISI 1025 Carbon Steel Annealed

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Form

Orientation

Property	Value	Unit	Conditions
Ultimate Bearing Strength(Fbru)	90.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · t=... in · e/D=2
Compressive Modulus(Ec)	29,000	ksi	22°C · Sheet/Strip/Plate
Compressive Yield Strength(Fcy)2 entries	36.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · L · t=... in
↳	36.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · LT · t=... in
Poisson's Ratio(ν)	0.3200	-	22°C
Shear Modulus(G)	11,000	ksi	22°C · Sheet/Strip/Plate
Ultimate Shear Strength(Fsu)	35.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · t=... in
Ultimate Tensile Strength(σUTS)2 entries	55.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · L · t=... in
↳	55.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · LT · t=... in
Yield Strength (0.2% offset)(σy)2 entries	36.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · L · t=... in
↳	36.00	ksi	22°C · Sheet/Strip/Plate · Annealed · AMS 5046 OR AMS-S-7952 · LT · t=... in
Young's Modulus(E)	29,000	ksi	22°C · Sheet/Strip/Plate

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

1 interactive curve for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Property	Value	Unit	Conditions	Source
CTE vs Temperature(α(T))	Curve (11 pts)	µin/in·°F	—

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.2840	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

AISI 1025 Carbon Steel Annealed

Mechanical Properties

Thermal Properties

Physical Properties

Regulatory Screening

Environmental

Quality & Standards

Industry-Specific