AISI 1025 Carbon Steel
VerifiedmetalAISI 1025 is a low-carbon steel (0.22–0.28% C) used in structural and mechanical applications requiring moderate strength and good machinability. Annealed and normalized conditions provide different strength levels and ductility characteristics, with the material offering adequate toughness for general engineering applications below 400°C.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Tempers & Conditions
Filter by
Form
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | — | Pa | 22°C · Bar · All · ASTM A 108 · t=... in · e/D=2 | — | |
Compressive Modulus(Ec) | — | Pa | 22°C · Sheet/Strip/Plate | — | |
Compressive Yield Strength(Fcy)3 entries | — | Pa | 22°C · Bar · All · ASTM A 108 · L · t=... in | — | |
| ↳ | — | Pa | 22°C · Bar · All · ASTM A 108 · LT · t=... in | — | |
| ↳ | — | Pa | 22°C · Bar · All · ASTM A 108 · ST · t=... in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Sheet/Strip/Plate | — | |
Ultimate Shear Strength(Fsu) | — | Pa | 22°C · Bar · All · ASTM A 108 · t=... in | — | |
Ultimate Tensile Strength(σUTS)3 entries | — | Pa | 22°C · Bar · All · ASTM A 108 · L · t=... in | — | |
| ↳ | — | Pa | 22°C · Bar · All · ASTM A 108 · LT · t=... in | — | |
| ↳ | — | Pa | 22°C · Bar · All · ASTM A 108 · ST · t=... in | — | |
Yield Strength (0.2% offset)(σy)3 entries | — | Pa | 22°C · Bar · All · ASTM A 108 · L · t=... in | — | |
| ↳ | — | Pa | 22°C · Bar · All · ASTM A 108 · LT · t=... in | — | |
| ↳ | — | Pa | 22°C · Bar · All · ASTM A 108 · ST · t=... in | — | |
Young's Modulus(E) | — | Pa | 22°C · Sheet/Strip/Plate | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (11 pts) | 1/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.