5086 Aluminum
Verifiedmetal5086 is an Al-Mg alloy (nominally 3.5-4.5% Mg) widely used in marine structures, pressure vessels, and welded aerospace components, offering excellent seawater corrosion resistance and good weldability with moderate strength. The H-tempers provide strain-hardened conditions ranging from H111 (slightly hardened, stress-relieved) to H38 (full hard), while the O temper is fully annealed; all variants maintain the alloy's superior corrosion performance and are not solution-heat-treatable.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec)2 entries | — | ksi | 22°C · Sheet/Plate | — | |
| ↳ | Curve (19 pts) | ksi | — | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet/Plate | — | |
Young's Modulus(E) | — | ksi | 22°C · Sheet/Plate | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.