5086-H36 is a non-heat-treatable aluminum-magnesium alloy (approximately 3-4% Mg) commonly used in marine, pressure vessel, and aerospace applications requiring superior seawater corrosion resistance and weldability. The H36 temper (strain-hardened and partially annealed) provides moderate strength with enhanced formability compared to fully hard conditions, making it suitable for structural applications in sheet and plate form where both strength and corrosion resistance are critical.
Compliance & Regulations
6 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)2 entries | 648.1 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · t=0.006-0.162 in · e/D=1.5 | ||
| ↳ | 365.4 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · t=0.006-0.162 in · e/D=2 | ||
Bearing Yield Strength(Fbry) | 448.2 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · t=0.006-0.162 in · e/D=1.5 | ||
Compressive Modulus(Ec) | 71.71 | GPa | 22°C · Sheet/Plate | ||
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (11 pts) | Pa | 21°C · L | ||
| ↳ | Curve (13 pts) | Pa | 21°C · LT | ||
Compressive Yield Strength(Fcy)3 entries | 241.3 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · L · t=0.006-0.162 in | ||
| ↳ | 262.0 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · LT · t=0.006-0.162 in | ||
| ↳ | 186.2 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · ST · t=0.006-0.162 in | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 26.54 | GPa | 22°C · Sheet/Plate | ||
Ultimate Shear Strength(Fsu) | 468.8 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · t=0.006-0.162 in | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (8 pts) | Pa | 21°C · L | ||
| ↳ | Curve (11 pts) | Pa | 21°C · L | ||
| ↳ | Curve (13 pts) | Pa | 21°C · LT | ||
| ↳ | Curve (9 pts) | Pa | 21°C · LT | ||
Ultimate Tensile Strength(σUTS)2 entries | 324.1 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · L · t=0.006-0.162 in | ||
| ↳ | 324.1 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · LT · t=0.006-0.162 in | ||
Yield Strength (0.2% offset)(σy)2 entries | 262.0 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · L · t=0.006-0.162 in | ||
| ↳ | 255.1 | MPa | 22°C · Sheet/Plate · H36 · AMS-QQ-A-250/7 · LT · t=0.006-0.162 in | ||
Young's Modulus(E) | 70.33 | GPa | 22°C · Sheet/Plate |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | 1/K | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 2.657 | kg/m³ | 22°C |