5086 aluminum is a non-heat-treatable Al-Mg alloy (typically 3-4% Mg) widely used in marine and aerospace applications requiring superior corrosion resistance and moderate strength. The H34 temper (strain-hardened and partially annealed) provides balanced mechanical properties suitable for sheet and plate applications in seawater service and structural components exposed to corrosive environments.
Compliance & Regulations
16 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)2 entries | 606.7 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in · e/D=1.5 | ||
| ↳ | 330.9 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in · e/D=2 | ||
Bearing Yield Strength(Fbry) | 399.9 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in · e/D=1.5 | ||
Compressive Modulus(Ec) | 71.71 | GPa | 22°C · Sheet/Plate | ||
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (12 pts) | Pa | 21°C · L | ||
| ↳ | Curve (11 pts) | Pa | 21°C · LT | ||
Compressive Yield Strength(Fcy)3 entries | 220.6 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · L · t=0.009-1.000 in | ||
| ↳ | 234.4 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · LT · t=0.009-1.000 in | ||
| ↳ | 179.3 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · ST · t=0.009-1.000 in | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 26.54 | GPa | 22°C · Sheet/Plate | ||
Ultimate Shear Strength(Fsu) | 441.3 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in | ||
Stress–Strain Curve(σ–ε) | Curve (15 pts) | Pa | 21°C · L | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (8 pts) | Pa | 21°C · L | ||
| ↳ | Curve (10 pts) | Pa | 21°C · L | ||
| ↳ | Curve (8 pts) | Pa | 21°C · LT | ||
| ↳ | Curve (9 pts) | Pa | 21°C · LT | ||
Ultimate Tensile Strength(σUTS) | 303.4 | MPa | 11 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy)2 entries | 234.4 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · L · t=0.009-1.000 in | ||
| ↳ | 227.5 | MPa | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · LT · t=0.009-1.000 in | ||
Young's Modulus(E) | 70.33 | GPa | 22°C · Sheet/Plate | ||
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | 1/K | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 2.657 | kg/m³ | 22°C |