5086 aluminum is a non-heat-treatable Al-Mg alloy (typically 3-4% Mg) widely used in marine and aerospace applications requiring superior corrosion resistance and moderate strength. The H34 temper (strain-hardened and partially annealed) provides balanced mechanical properties suitable for sheet and plate applications in seawater service and structural components exposed to corrosive environments.
Compliance & Regulations
16 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)2 entries | 88.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in · e/D=1.5 | ||
| ↳ | 48.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in · e/D=2 | ||
Bearing Yield Strength(Fbry) | 58.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in · e/D=1.5 | ||
Compressive Modulus(Ec) | 10,400 | ksi | 22°C · Sheet/Plate | ||
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (12 pts) | ksi | 21°C · L | ||
| ↳ | Curve (11 pts) | ksi | 21°C · LT | ||
Compressive Yield Strength(Fcy)3 entries | 32.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · L · t=0.009-1.000 in | ||
| ↳ | 34.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · LT · t=0.009-1.000 in | ||
| ↳ | 26.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · ST · t=0.009-1.000 in | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 3,850 | ksi | 22°C · Sheet/Plate | ||
Ultimate Shear Strength(Fsu) | 64.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · t=0.009-1.000 in | ||
Stress–Strain Curve(σ–ε) | Curve (15 pts) | ksi | 21°C · L | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (8 pts) | ksi | 21°C · L | ||
| ↳ | Curve (10 pts) | ksi | 21°C · L | ||
| ↳ | Curve (8 pts) | ksi | 21°C · LT | ||
| ↳ | Curve (9 pts) | ksi | 21°C · LT | ||
Ultimate Tensile Strength(σUTS) | 44.00 | ksi | 11 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy)2 entries | 34.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · L · t=0.009-1.000 in | ||
| ↳ | 33.00 | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/7 · LT · t=0.009-1.000 in | ||
Young's Modulus(E) | 10,200 | ksi | 22°C · Sheet/Plate | ||
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.09600 | lb/in³ | 22°C |