5083 Aluminum H343 is a strain-hardened Al-Mg alloy (approximately 4.4% Mg) widely used in marine and aerospace applications requiring superior corrosion resistance and moderate strength. The H343 temper provides enhanced strength through controlled cold-work followed by stabilization heat treatment, delivering yield strength around 215 MPa with good ductility and excellent seawater corrosion resistance in sheet and plate forms.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | 10,400 | ksi | 22°C · Sheet/Plate | ||
Elongation at Break(εf)2 entries | 6.000 | - | 22°C · Sheet/Plate · H343 · AMS-QQ-A-250/6 · L · t=0.051-0.125 in | ||
| ↳ | 8.000 | - | 22°C · Sheet/Plate · H343 · AMS-QQ-A-250/6 · L · t=0.126-0.249 in | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 3,350 | ksi | 22°C · Extrusion | ||
Ultimate Tensile Strength(σUTS)2 entries | 50.00 | ksi | 22°C · Sheet/Plate · H343 · AMS-QQ-A-250/6 · L · t=0.051-0.125 in | ||
| ↳ | 50.00 | ksi | 22°C · Sheet/Plate · H343 · AMS-QQ-A-250/6 · L · t=0.126-0.249 in | ||
Yield Strength (0.2% offset)(σy)2 entries | 39.00 | ksi | 22°C · Sheet/Plate · H343 · AMS-QQ-A-250/6 · L · t=0.051-0.125 in | ||
| ↳ | 39.00 | ksi | 22°C · Sheet/Plate · H343 · AMS-QQ-A-250/6 · L · t=0.126-0.249 in | ||
Young's Modulus(E) | 10,200 | ksi | 22°C · Sheet/Plate |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.09600 | lb/in³ | 22°C |