5083 Aluminum
Verifiedmetal5083 is a non-heat-treatable aluminum-magnesium alloy (3-5.5% Mg) offering high strength, excellent seawater corrosion resistance, and good weldability, widely used in marine vessels, pressure vessels, and cryogenic applications. Available in various work-hardened tempers (H111–H343) and annealed condition (O), providing yield strengths ranging from ~95 MPa (O) to ~215 MPa (H38) with maintained toughness at low temperatures.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec)2 entries | — | Pa | 22°C · Sheet/Plate | — | |
| ↳ | Curve (19 pts) | Pa | — | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G)2 entries | — | Pa | 22°C · Extrusion | — | |
| ↳ | — | Pa | 22°C · Sheet/Plate | — | |
Young's Modulus(E) | — | Pa | 22°C · Sheet/Plate | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T))2 entries | Curve (17 pts) | 1/K | — | — | |
| ↳ | Curve (21 pts) | 1/K | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | W/(m·K) | — | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.