5083 Aluminum H112

Verifiedmetal

UNS A95083

5083 aluminum is a non-heat-treatable Al-Mg alloy (approximately 4.4–5.0% Mg) with excellent seawater corrosion resistance and moderate strength, widely used in marine structures, pressure vessels, and cryogenic applications. The H112 temper (solution heat-treated and stress-relieved) provides controlled strength and ductility suitable for extrusions and plate stock, with typical yield strengths around 215–230 MPa and elongation values of 10–15% depending on section size.

aerospacestructural

Compliance & Regulations

?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65

5083 Aluminum/5083 Aluminum H112

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Form

Thickness

Specification

Property	Value	Unit	Conditions
Compressive Modulus(Ec)	10,400	ksi	22°C · Sheet/Plate
Elongation at Break(εf)3 entries	12.00	-	22°C · Sheet/Plate · H112 · AMS-QQ-A-250/6 · L · t=0.250-1.500 in
↳	12.00	-	22°C · Sheet/Plate · H112 · AMS-QQ-A-250/6 · L · t=1.501-3.000 in
↳	12.00	-	22°C · Extrusion · H112 · AMS-QQ-A-200/4 · L · t=≤5.000a in
Poisson's Ratio(ν)	0.3300	-	22°C
Shear Modulus(G)	3,350	ksi	22°C · Extrusion
Ultimate Tensile Strength(σUTS)3 entries	40.00	ksi	22°C · Sheet/Plate · H112 · AMS-QQ-A-250/6 · L · t=0.250-1.500 in
↳	39.00	ksi	22°C · Sheet/Plate · H112 · AMS-QQ-A-250/6 · L · t=1.501-3.000 in
↳	39.00	ksi	22°C · Extrusion · H112 · AMS-QQ-A-200/4 · L · t=≤5.000a in
Yield Strength (0.2% offset)(σy)3 entries	16.00	ksi	22°C · Extrusion · H112 · AMS-QQ-A-200/4 · L · t=≤5.000a in
↳	18.00	ksi	22°C · Sheet/Plate · H112 · AMS-QQ-A-250/6 · L · t=0.250-1.500 in
↳	17.00	ksi	22°C · Sheet/Plate · H112 · AMS-QQ-A-250/6 · L · t=1.501-3.000 in
Young's Modulus(E)	10,200	ksi	22°C · Sheet/Plate

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

2 interactive curves for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Property	Value	Unit	Conditions	Source
CTE vs Temperature(α(T))	Curve (9 pts)	µin/in·°F	—
Thermal Conductivity vs Temperature(k(T))	Curve (20 pts)	BTU/(hr·ft·°F)	—

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.09600	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

5083 Aluminum H112

Mechanical Properties

Thermal Properties

Physical Properties

Regulatory Screening

Environmental

Safety & Biocompatibility

Quality & Standards

Industry-Specific