17-7PH (17% Cr, 7% Ni, precipitation-hardening stainless steel) is a martensitic PH stainless used in aerospace and defense applications requiring high strength and corrosion resistance at elevated temperatures; the STA (solution-treated and aged) condition provides yield strengths in the 1200–1500 MPa range with good fatigue resistance and ductility suitable for springs, fasteners, and structural components operating to approximately 480°C.
Compliance & Regulations
1 interactive curve for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | Curve (15 pts) | ksi | — | ||
Poisson's Ratio(ν) | 0.2800 | - | 22°C | ||
Shear Modulus(G) | 11,500 | ksi | 22°C · Sheet | ||
Young's Modulus(E) | 29,000 | ksi | 22°C · Sheet |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (21 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (25 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (21 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2760 | lb/in³ | 22°C |