17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH, sintered) — Properties & Data | MatWorld

17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH, sintered)

UNS S17400· Ultrafuse 17-4 PH

BASF Forward AM Ultrafuse 17-4 PH, sintered, is 17-4PH stainless steel made by Fused Deposition Modeling (FDM) of a filament of steel powder in a polymer binder, followed by debinding and sintering. The printed green part is catalytically debound and then sintered in a furnace, where it shrinks substantially, so it is printed oversize with allowance for slightly different shrinkage between build directions. The sintered steel retains some residual porosity and a layered surface finish, and parts are often precipitation hardened and machined on critical features. Printed parts are used for tooling, jigs and fixtures, brackets and functional prototypes. Every value on this page is read from BASF Forward AM's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

toolingjigs and fixturesbracketsfunctional prototypes

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

17-4PH Stainless Steel (FDM)/17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH, sintered)

Units:

si imperial

Filter by

Property	Value	Unit	Conditions	Source
Density(ρ)	7.600	kg/m³	sintered · ISO 3369

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.