17-4PH SS (SLM, H900)
Verifiedmetal17-4PH is a precipitation-hardening stainless steel optimized for additive manufacturing via selective laser melting (SLM), with H900 heat treatment applied post-build to achieve peak strength and hardness. This material combines corrosion resistance typical of stainless steels with the high strength-to-weight ratio needed for aerospace and defense applications where complex geometries and minimal material waste are critical; engineers select it when traditional wrought 17-4PH cannot economically produce the required part geometry or when the design benefits from direct AM fabrication.
aerospace structural componentsdefense hardware and fixturesmedical implants and instrumentshigh-strength brackets and housingscorrosion-resistant pump impellerstooling inserts
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Elongation at Break(εf) | — | - | — | — | |
Hardness (Vickers)(HV) | — | HV | — | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | — | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | 20°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.