ZnCu2Ni is a ternary copper-based alloy incorporating zinc and nickel elements, belonging to the family of copper alloys used for enhanced mechanical and corrosion-resistant properties. This alloy composition is typical of specialized brasses and bronzes engineered for applications requiring a balance of strength, wear resistance, and environmental durability. The material is primarily selected for marine hardware, electrical contacts, and industrial fasteners where corrosion resistance and moderate strength are critical performance requirements.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 20,678 | ksi | DFT · OptB88vdW | ||
Poisson's Ratio(ν) | 0.3200 | - | DFT · OptB88vdW | ||
Shear Modulus(G) | 9,320.1 | ksi | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3124 | lb/in³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | DFT · OptB88vdW | ||
Magnetic Moment(μB) | 0.000 | µB | DFT · OptB88vdW | ||
Thermoelectric Power Factor(PF)2 entries | 0.000514 | W/(m·K²) | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 0.000525 | W/(m·K²) | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Seebeck Coefficient(S)2 entries | -7.730 | μV/K | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | -7.650 | μV/K | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.00330 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf) | -0.1242 | eV/atom | DFT · OptB88vdW |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data