Waspaloy
VerifiedmetalUNS N07001
Nickel-based superalloy (Ni-19.5Cr-13.5Co-4.3Mo-3Al-1.4Ti). 795 MPa yield, 1275 MPa UTS. Workhorse disc alloy for intermediate-temperature turbine stages (up to ~700°C). Good forgeability and weldability for a superalloy.
turbine discgas turbineaerospaceforged superalloy
Compliance & Regulations
?ITAR?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
Tempers & Conditions
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Elongation at Break(εf)2 entries | Curve (9 pts) | - | L | — | |
| ↳ | Curve (8 pts) | - | L | — | |
Ramberg–Osgood Exponent vs Temperature(n(T)) | Curve (10 pts) | - | — | — | |
Reduction of Area vs Temperature(RA(T)) | Curve (10 pts) | - | L | — | |
Stress–Strain Curve(σ–ε) | — | ksi | 5 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS)2 entries | — | ksi | 20°C | — | |
| ↳ | Curve (20 pts) | ksi | — | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | 20°C | — | |
Young's Modulus(E)2 entries | — | ksi | — | — | |
| ↳ | — | ksi | 22°C · Sheet/Strip/Plate | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (17 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (17 pts) | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ)2 entries | — | lb/in³ | — | — | |
| ↳ | — | lb/in³ | 22°C | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.