Waspaloy

Verifiedmetal

UNS N07001

Nickel-based superalloy (Ni-19.5Cr-13.5Co-4.3Mo-3Al-1.4Ti). 795 MPa yield, 1275 MPa UTS. Workhorse disc alloy for intermediate-temperature turbine stages (up to ~700°C). Good forgeability and weldability for a superalloy.

turbine discgas turbineaerospaceforged superalloy

Compliance & Regulations

?ITAR?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65

Tempers & Conditions

Solution, stabilization, and precipitation heat treated

Units:

si imperial

Property OverviewNormalized to typical max values

10 interactive curves for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Filter by

Form

Property	Value	Unit	Conditions
Elongation at Break(εf)2 entries	Curve (9 pts)	-	L
↳	Curve (8 pts)	-	L
Ramberg–Osgood Exponent vs Temperature(n(T))	Curve (10 pts)	-	—
Reduction of Area vs Temperature(RA(T))	Curve (10 pts)	-	L
Stress–Strain Curve(σ–ε)	—	Pa	5 entriesClick to expand
Ultimate Tensile Strength(σUTS)2 entries	1.275	GPa	20°C
↳	Curve (20 pts)	Pa	—
Yield Strength (0.2% offset)(σy)	795.0	MPa	20°C
Young's Modulus(E)2 entries	213.0	GPa	—
↳	211.0	GPa	22°C · Sheet/Strip/Plate

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

3 interactive curves for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Property	Value	Unit	Conditions
CTE vs Temperature(α(T))	Curve (17 pts)	1/K	—
Specific Heat vs Temperature(Cp(T))	Curve (17 pts)	J/(kg·K)	—
Thermal Conductivity vs Temperature(k(T))	Curve (17 pts)	W/(m·K)	—

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)2 entries	8.190	kg/m³	—
↳	8.249	kg/m³	22°C

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

Export Control

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

Waspaloy

Tempers & Conditions

Mechanical Properties

Thermal Properties

Physical Properties

Regulatory Screening

Environmental

Export Control

Quality & Standards

Industry-Specific