UP3 — Properties & Data | MatWorld

UP3

ceramic

· JVASP-30449· UP3

UP3 is a technical ceramic material engineered for applications requiring high stiffness and thermal stability. While its specific composition is not detailed in available documentation, its density and elastic properties suggest it is likely a dense oxide or carbide ceramic suitable for structural and wear-resistant applications. This material is commonly selected in industries where ceramic hardness, temperature resistance, and dimensional stability outweigh the brittleness constraints typical of conventional ceramics.

wear-resistant componentshigh-temperature structural partsbearing surfacescutting tool insertsprecision mechanical sealsaerospace thermal barriers

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

Units:

si imperial

Property	Value	Unit	Conditions
Bulk Modulus(K)	106.5	GPa	DFT · OptB88vdW
Poisson's Ratio(ν)	0.2200	-	DFT · OptB88vdW
Shear Modulus(G)	75.39	GPa	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.038	kg/m³	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Filter by

Method

Carrier

Property	Value	Unit	Conditions
Band Gap(Eg)2 entries	0.000	eV	DFT · OptB88vdW
↳	0.000	eV	DFT · TBmBJ
Thermoelectric Power Factor(PF)2 entries	0.000316	W/(m·K²)	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	0.000299	W/(m·K²)	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Seebeck Coefficient(S)2 entries	10.78	μV/K	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	10.92	μV/K	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Energy Above Hull(ΔEhull)	0.04600	eV/atom	DFT · OptB88vdW
Formation Energy(ΔHf)	-0.6141	eV/atom	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

UP3

Mechanical Properties

Physical Properties

Electrical Properties

Other Properties

Regulatory Screening

Environmental