TiMo2As
metal· JVASP-75723· TiMo2As
TiMo2As is a titanium-molybdenum-arsenic intermetallic compound belonging to the family of transition metal pnictides. This is a research-phase material studied primarily for its potential electronic and structural properties rather than for established industrial production. The Ti-Mo-As system is of interest in materials science for investigating novel intermetallic phases that may exhibit useful combinations of mechanical strength and electrical/magnetic behavior, though applications remain largely exploratory pending further characterization and scale-up feasibility.
experimental intermetallic researchelectronic materials developmenthigh-performance alloy candidatesphase diagram studiespotential aerospace applications (exploratory)materials property screening
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 26,073.4 | ksi | — | ||
Shear Modulus(G) | 2,590.4 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3046 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.4619 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.00683 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.