Ti3Cu
metal· JVASP-16502· Ti3Cu
Ti3Cu is an intermetallic compound in the titanium-copper system, representing a hard, brittle phase that forms at specific composition ratios. This material is primarily of research and academic interest rather than a widely deployed engineering material, studied for its potential in high-temperature applications and as a reinforcing phase in composite systems. Interest in Ti3Cu centers on understanding phase behavior in Ti-Cu alloys and exploring whether controlled microstructures containing this phase could enable lightweight, high-stiffness materials for aerospace or automotive applications.
intermetallic researchcomposite reinforcement phaseshigh-temperature compound studiesmaterials characterizationtitanium alloy development
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 118.8 | GPa | — | ||
Poisson's Ratio(ν) | 0.4100 | - | — | ||
Shear Modulus(G) | 23.93 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 5.539 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.1003 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.00343 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.