Ti2Ga is an intermetallic compound combining titanium and gallium, belonging to the family of titanium-based intermetallics that offer potential for high-temperature and lightweight structural applications. This material is primarily of research and development interest rather than established in high-volume production; titanium intermetallics are investigated for aerospace and high-temperature engine components where the combination of low density with potential strength retention at elevated temperatures could provide advantages over conventional titanium alloys or superalloys. Engineers would consider Ti2Ga when exploring advanced materials for next-generation applications requiring weight reduction and thermal stability, though material availability, processing reproducibility, and cost remain limiting factors compared to mature alternatives.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 17,527.7 | ksi | DFT | ||
Shear Modulus(G) | 9,105.7 | ksi | DFT |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2069 | lb/in³ | DFT · OptB88vdW |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | DFT · OptB88vdW | ||
Magnetic Moment(μB) | 0.000 | µB | DFT · OptB88vdW | ||
Thermoelectric Power Factor(PF)2 entries | 0.00168 | W/(m·K²) | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 0.00170 | W/(m·K²) | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C | ||
Seebeck Coefficient(S)2 entries | 11.34 | μV/K | DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C | ||
| ↳ | 10.90 | μV/K | DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | DFT · OptB88vdW | ||
Formation Energy(ΔHf)2 entries | -0.3940 | eV/atom | DFT · OptB88vdW | ||
| ↳ | -0.4042 | eV/atom | Measured |
Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data