Ti-6Al-4V ELI (Grade 23) (L-PBF, Nikon SLM Solutions Ti6Al4V ELI (Grade 23), annealed) — Properties & Data | MatWorld

Ti-6Al-4V ELI (Grade 23) (L-PBF, Nikon SLM Solutions Ti6Al4V ELI (Grade 23), annealed)

UNS R56407· Ti6Al4V ELI (Grade 23)

Nikon SLM Solutions Ti6Al4V ELI (Grade 23) is that maker's extra-low-interstitial Ti-6Al-4V grade, printed by laser powder bed fusion and annealed. As built, the alloy has columnar prior-beta grains along the build direction filled with fine acicular martensite, and high residual stress. Annealing relieves that stress and decomposes the martensite into a fine alpha-beta structure, improving ductility, but does not close porosity, so fatigue-critical parts are often also hot isostatically pressed. Parts need supports, and their rough surfaces are usually machined. It is used for aerospace brackets and orthopaedic and dental implant components, including porous lattices. Every value on this page is read from Nikon SLM Solutions' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

aerospace bracketsorthopaedic implant componentsdental implant componentsporous lattices

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Ti-6Al-4V ELI (Grade 23, L-PBF)/Ti-6Al-4V ELI (Grade 23) (L-PBF, Nikon SLM Solutions Ti6Al4V ELI (Grade 23), annealed)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Table

Orientation

Specification

Property	Value	Unit	Conditions
Elongation at Break(εf)	7.000 – 16.00	%	26 entriesClick to expand
Ultimate Tensile Strength(σUTS)	143.6 – 162.4	ksi	26 entriesClick to expand
Yield Strength (0.2% offset)(σy)	116 – 152.3	ksi	26 entriesClick to expand

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.1600	lb/in³	—	—

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.