Ti-6Al-4V annealed is a two-phase titanium alloy (6% aluminum, 4% vanadium) in a stress-relieved condition offering moderate strength with improved ductility and fracture toughness compared to higher-strength tempers. Widely used in aerospace engine casings, compressor blades, and airframe components where operating temperatures to 300°C and damage tolerance are critical; available in forgings, extrusions, castings, and wrought forms per MIL specifications.
Compliance & Regulations
47 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | 1.400 – 1.951 | GPa | 23 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | 1.110 – 1.496 | GPa | 23 entriesClick to expand | ||
Compressive Modulus(Ec) | Curve (18 pts) | Pa | L | ||
Compressive Tangent Modulus vs Stress(Etn(σ))4 entries | Curve (13 pts) | Pa | 21°C · L | ||
| ↳ | Curve (12 pts) | Pa | 204°C · L | ||
| ↳ | Curve (12 pts) | Pa | 371°C · L | ||
| ↳ | Curve (11 pts) | Pa | 482°C · L | ||
Compressive Yield Strength(Fcy) | 572.3 – 979.1 | MPa | 27 entriesClick to expand | ||
Elongation at Break(εf) | 5.000 – 10.00 | - | 24 entriesClick to expand | ||
Fatigue Crack Growth Rate(da/dN)3 entries | Curve (115 pts) | m/cycle | 21°C | ||
| ↳ | Curve (14 pts) | m/cycle | 21°C | ||
| ↳ | Curve (157 pts) | m/cycle | 21°C | ||
Poisson's Ratio(ν) | 0.3100 | - | 22°C | ||
Reduction of Area(RA) | 8.000 – 25.00 | - | 15 entriesClick to expand | ||
Shear Modulus(G) | 44.82 | GPa | 22°C · Extrusion | ||
Ultimate Shear Strength(Fsu) | 544.7 – 620.5 | MPa | 10 entriesClick to expand | ||
S–N Curve (Wöhler)(S–N) | — | Pa | 15 entriesClick to expand | ||
Stress–Strain Curve(σ–ε)2 entries | Curve (20 pts) | Pa | 21°C · L | ||
| ↳ | Curve (20 pts) | Pa | 21°C · LT | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | Pa | 11 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | 861.8 – 958.4 | MPa | 36 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 813.6 – 903.2 | MPa | 36 entriesClick to expand | ||
Yield Strength vs Temperature(σy(T)) | Curve (7 pts) | Pa | — | ||
Young's Modulus(E) | Curve (18 pts) | Pa | L | ||
Young's Modulus vs Temperature(E(T)) | Curve (8 pts) | Pa | — | ||
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (13 pts) | 1/K | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (7 pts) | J/(kg·K) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (11 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 4.429 | kg/m³ | 22°C |