Ti-13V-11Cr-3Al in the F (as-fabricated) condition is a metastable beta titanium alloy used in aerospace fasteners and structural components requiring high strength and fatigue resistance; the F temper provides strength in the 1,200–1,400 MPa range without solution treatment, making it suitable for applications where dimensional stability and repeatable mechanical properties are critical.
Compliance & Regulations
1 interactive curve for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
S–N Curve (Wöhler)(S–N) | Curve (11 pts) | ksi | — | ||
Young's Modulus(E) | 14,500 | ksi | 22°C · Sheet/Strip/Plate |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (18 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (17 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (17 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1740 | lb/in³ | 22°C |