TaInO4 — Properties & Data | MatWorld

TaInO4

ceramic

· TaInO4

TaInO4 is an ternary oxide ceramic composed of tantalum, indium, and oxygen, belonging to the family of mixed-metal oxides used primarily in electronic and photonic applications. This material is largely in the research and development stage, explored for potential use in optoelectronic devices, photocatalysis, and high-permittivity dielectric applications where the combination of tantalum's refractory properties and indium's semiconducting characteristics offers tunable electronic behavior. The material's significance lies in its potential to enable next-generation electronics and sensing devices where conventional single-oxide ceramics reach performance limits.

optoelectronic devicesphotocatalytic applicationsdielectric coatingssemiconductor researchthin-film electronicsadvanced ceramics development

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

Units:

si imperial

Property	Value	Unit	Conditions
Bulk Modulus(K)	25,565.8	ksi	DFT · OptB88vdW
Poisson's Ratio(ν)	0.3200	-	DFT · OptB88vdW
Shear Modulus(G)	10,547.1	ksi	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.2901	lb/in³	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Filter by

Method

Carrier

Property	Value	Unit	Conditions
Band Gap(Eg)2 entries	3.676	eV	DFT · OptB88vdW
↳	5.148	eV	DFT · TBmBJ
Dielectric Constant (Relative Permittivity)(εr)	11.53 range 4.925–18.14median of 2 measurements	-	DFT · PBEsol
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries	5.068	-	DFT · OptB88vdW
↳	3.886	-	DFT · TBmBJ
Magnetic Moment(μB)	0.000	µB	DFT · OptB88vdW
Thermoelectric Power Factor(PF)2 entries	0.00143	W/(m·K²)	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	0.000558	W/(m·K²)	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Seebeck Coefficient(S)2 entries	-282	μV/K	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	449	μV/K	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Spectroscopic Limited Maximum Efficiency (SLME)(SLME)	0.000	%	DFT · TBmBJ

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Energy Above Hull(ΔEhull)	0.000	eV/atom	DFT · OptB88vdW
Formation Energy(ΔHf)	-2.540	eV/atom	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

TaInO4

Mechanical Properties

Physical Properties

Electrical Properties

Other Properties

Regulatory Screening

Environmental