TaAgF6
metal· JVASP-13071· TaAgF6
TaAgF6 is a tantalum-silver fluoride compound that belongs to the family of mixed-metal fluorides, representing an experimental material rather than a widely commercialized alloy. This composition combines tantalum's known corrosion resistance and high melting point with silver's conductive properties, mediated through fluoride coordination chemistry, making it primarily a research-phase material for specialized applications requiring unique combinations of chemical stability and electronic properties.
fluoride solid-state chemistryexperimental conductive ceramicscorrosion-resistant coatings (research)high-temperature compound studieselectrochemical applications (development)advanced materials research
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 5,782.7 | ksi | — | ||
Poisson's Ratio(ν) | 0.4400 | - | — | ||
Shear Modulus(G) | 931.1 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2018 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 3.308 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -309.2 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -2.821 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.