SrTlHg2
ceramic· SrTlHg2
SrTlHg₂ is a ternary intermetallic ceramic compound containing strontium, thallium, and mercury. This is a research-phase material studied primarily in solid-state chemistry and materials science contexts rather than established industrial production. The material belongs to the family of heavy-metal intermetallics and represents exploratory work in phase diagram mapping and crystal structure characterization; potential applications remain experimental and would likely focus on specialized electronic, photonic, or catalytic contexts where the combination of these elements offers unique properties not available in conventional alternatives.
experimental intermetallic researchsolid-state chemistry studiescrystal structure characterizationspecialized electronic materials (exploratory)
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.3691 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg)2 entries | 0.000 | eV | — | ||
| ↳ | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -5.190 | µV/K | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.00790 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.3025 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.