SrMg2FeH8
metal· JVASP-53811· SrMg2FeH8
SrMg2FeH8 is an experimental metal hydride compound combining strontium, magnesium, iron, and hydrogen. This material belongs to the complex metal hydride family, which is primarily investigated for hydrogen storage, thermal management, and advanced energy applications where reversible hydrogen uptake/release is desirable. While not yet in widespread industrial use, materials in this class are of significant research interest for next-generation energy systems where conventional metals and alloys cannot meet performance requirements.
hydrogen storage systemsadvanced energy researchthermal management applicationsmetal hydride researchexperimental materials developmentalternative energy storage
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 8,161.3 | ksi | — | ||
Poisson's Ratio(ν) | 0.1800 | - | — | ||
Shear Modulus(G) | 6,622.4 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1054 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 1.651 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -264.4 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.4376 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.