SnClF

ceramic

· JVASP-38029· SnClF

SnClF is a tin-based halide ceramic compound composed of tin, chlorine, and fluorine. This is an experimental layered material currently under investigation in materials research rather than an established commercial ceramic, with particular interest in its potential as a two-dimensional or quasi-2D material for advanced applications. The material exhibits properties characteristic of halide perovskites and layered ionic ceramics, making it relevant to researchers exploring next-generation semiconductors, photovoltaic devices, and solid-state applications where low exfoliation energy indicates strong potential for layer separation and nanostructure engineering.

research and developmentlayered semiconductor materialstwo-dimensional materials engineeringhalide perovskite alternativesphotonic and optoelectronic devicesion conductivity studies

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

Units:

si imperial

Property	Value	Unit	Conditions
Bulk Modulus(K)	7,779.8	ksi	DFT · OptB88vdW
Exfoliation Energy(Eexf)	81.03	meV/atom	DFT · OptB88vdW
Poisson's Ratio(ν)	0.3200	-	DFT · OptB88vdW
Shear Modulus(G)	3,186.5	ksi	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.1751	lb/in³	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Filter by

Method

Carrier

Property	Value	Unit	Conditions
Band Gap(Eg)2 entries	2.919	eV	DFT · OptB88vdW
↳	3.556	eV	DFT · TBmBJ
Dielectric Constant (Relative Permittivity)(εr)	42.02	-	DFT · OptB88vdW
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries	5.482	-	DFT · OptB88vdW
↳	4.391	-	DFT · TBmBJ
Magnetic Moment(μB)	0.000	µB	DFT · OptB88vdW
Piezoelectric Modulus(eij)	0.000	C/m²	DFT · OptB88vdW
Thermoelectric Power Factor(PF)2 entries	0.000713	W/(m·K²)	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	0.00270	W/(m·K²)	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Seebeck Coefficient(S)2 entries	-107.9	μV/K	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	381.5	μV/K	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Spectroscopic Limited Maximum Efficiency (SLME)(SLME)	1.060	%	DFT · TBmBJ

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Energy Above Hull(ΔEhull)	0.00760	eV/atom	DFT · OptB88vdW
Formation Energy(ΔHf)	-1.763	eV/atom	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

SnClF — Properties & Data | MatWorld

SnClF

Mechanical Properties

Physical Properties

Electrical Properties

Other Properties

Regulatory Screening

Environmental