ScZn2Ag
metal· JVASP-40223· ScZn2Ag
ScZn2Ag is a ternary intermetallic compound combining scandium, zinc, and silver, representing an exploratory alloy system rather than a well-established commercial material. This composition falls within research into lightweight, high-strength metallic systems, particularly relevant to applications where corrosion resistance and specific stiffness matter. The incorporation of scandium—a rare earth element known for grain refinement and precipitation hardening—suggests potential use in aerospace or high-performance structural applications, though ScZn2Ag itself remains primarily in the experimental phase without widespread industrial adoption.
aerospace research applicationshigh-strength lightweight structurescorrosion-resistant alloy developmentrare-earth metallurgy researchspecialized engineering prototypesmaterials science investigation
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 12,676.3 | ksi | — | ||
Poisson's Ratio(ν) | 0.3200 | - | — | ||
Shear Modulus(G) | 6,265.6 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2538 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | 7.790 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.00710 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.3045 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.