ScInNi2
metal· JVASP-18039· ScInNi2
ScInNi2 is an intermetallic compound combining scandium, indium, and nickel, belonging to the family of ternary metallic intermetallics. This is a research-phase material with limited commercial production; it is studied primarily for its potential in high-performance structural applications where the combination of relatively low density and significant stiffness could offer weight savings compared to conventional engineering alloys. The material's potential lies in aerospace and automotive sectors where weight reduction and high-temperature stability are critical, though practical applications remain largely experimental pending validation of manufacturability and long-term performance.
aerospace structures (research phase)lightweight intermetallicshigh-stiffness compositionsexperimental materialsautomotive lightweightingmaterials research & development
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 17,858.5 | ksi | — | ||
Poisson's Ratio(ν) | 0.3200 | - | — | ||
Shear Modulus(G) | 7,974.2 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2710 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | 6.870 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.4792 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.