ScInAg2
metal· JVASP-18587· ScInAg2
ScInAg2 is an intermetallic compound composed of scandium, indium, and silver, belonging to the family of lightweight metallic compounds with potential for advanced applications. This material is primarily of research interest rather than widely established in industry, being studied for its mechanical properties and potential use in specialized alloys where combinations of strength, workability, and thermal properties are valuable. The scandium-indium-silver system represents an emerging area in materials science focused on developing high-performance alloys for aerospace, electronic, and structural applications where conventional metals may be limited.
aerospace structural componentshigh-performance alloys researchelectronic interconnectsexperimental metallic compoundslightweight applications development
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 12,951.9 | ksi | — | ||
Poisson's Ratio(ν) | 0.3800 | - | — | ||
Shear Modulus(G) | 5,325.8 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2907 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | 9.360 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.3188 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.